Maker & Circuit Development

KEMO ELECTRONIC

A timer with adjustable times between 1 second and 2047 seconds or 1 minute and 2047 minutes. The timer switches on after pressing the key and switches off again when the adjusted time has elapsed. The time lapse may be stopped at any time by using a secon...

ESSENTRA COMPONENTS

Miniature PCB support posts that simply snap into place and require no special tools to install. Supplied in packs of 25. • 11.1mm Spacer height • 4mm PCB/chassis hole diameter • No installation tool required • Simple snap fit design • Manufactured in Nylo...

SNAP CIRCUITS

Exciting project kit which is designed to reinforce STEM concepts (Science, Technology, Engineering & Maths) with creative and fun activities. The projects provide an understanding of how electricity and magnetism work in the home and how they relate to ea...

CIF

The AEB16 is a double sided, 35 micron Epoxy Base prototyping board without resin. 8/10th, board measures 100x160mm. • 35µ Prototyping board • Double sided epoxy • 8 Layers of glass cloth • MIL 13949 F Standard • Flammability class UL94V0 • Moisture absorp...

ESSENTRA COMPONENTS

Easy to install dual locking PCB supports that require no special tools; simply press the head, which expands the rivet base - locking it into position. Supplied in packs of 40. • 6.4mm Spacer height, 3.18mm hole diameter • No installation tool required • ...

WAVESHARE

The Base Board Lite is a compact and effective expansion board for the Raspberry Pi Compute Module 4 that provides a wide range of connectivity options, making it ideal for various projects and applications or integration into an end product. The Base Boar...

WHADDA

General purpose input/output shield for Arduino Uno projects. The shield controls both analogue and digital input pins and features a stackable design for use with other Uno shields. • 6x Relay outputs (0.5A max 30V) • 6x Analogue inputs • 6x Digital input...

KITRONIK

Air quality and environmental board for micro:bit provides a complete air monitoring and reporting solution for the BBC micro:bit. The wealth of on-board sensors and connection points allow to collect extensive air quality data that can be stored in on-boa...

WHADDA

Designed to help you get started experiementing and prototyping with Arduino, this starter kit includes an Arduino development board and a comprehensive selection of components for projects. • Kit includes an ATmega328 development board • Manual provides t...

GERTBOARD

Gertboard is an input/output (I/O) extension board for the Raspberry Pi computer. It fits onto the GPIO pins of the Raspberry Pi (the double row of pins on the upper left corner) via a socket on the back of the Gertboard. A bit of care is required when put...

ARGON 40

Simply replaces the bottom section of the original Argon ONE case to allow M.2 SSD support. Fully compatible with any M.2 SATA SSD drive with Key-B or Key-B&M. SSD drives deliver faster boot speeds and increased capacity over standard MicroSD cards. • Prov...

MULTICOMP PRO

Useful prototype wiring tool for PCB wiring, reworking and modification. The MP005876 pencil is fitted with a stainless steel tip and is preloaded with a tinned copper wire (TCW) bobbin. • Well balanced and easy to handle • High quality stainless steel tip...

SEEED STUDIO

The Grove AHT20 I2C industrial grade temperature and humidity sensor is a new generation of temperature and humidity sensor embedded with a dual-row flat and no-lead SMD package, suitable for the reflow soldering. AHT20 is equipped with a newly designed AS...

SEEED STUDIO

The Grove Oxygen Sensor (MIX8410) is an electrochemical oxygen sensor and it can be used to test the oxygen concentration in air. Under the catalysis of the electrodes, a redox reaction occurs on the working electrode and the counter electrode, thereby gen...

SEEED STUDIO

The Grove temperature, humidity and barometer sensor (BME280) provides a precise measurement of not only barometric pressure and temperature, but also the humidity in the environment. The air pressure can be measured in a range from 300 hPa to 1100hPa with...

WHADDA

40-way Male to Male flat jumper cable designed to simplify prototyping. The cable can be easily stripped apart into single or multiple jumper wires as required. • Pre-cut, pre-stripped and pre-formed wires • Copper conductors with PVC insulation • Compatib...

SEEED STUDIO

The CANBed Arduino CAN-BUS development kit carries an ATmega32U4 chip alongside the MCP2515 and MCP2551 CAN-BUS controller and transceiver, which combines the CAN-BUS Shield and Arduino Development Board together on a single board. • ATmega32U4 with Ardui...

WURTH ELEKTRONIK

A range of SMD Steel Spacers that are designed to assist with surface mount processes and pick-and-place machines, enabling manufacturers to reduce production costs. These spacers are suitable for simple and fast automated assembly and can handle high mech...

WHADDA

Simple and effective keypad module for integration into Arduino applications that require user input. The keypad provides buttons in a standard three column, four row configuration and is compatible with the keypad.h library. • Keypad module for applicatio...

MULTICOMP PRO

Experimental development board with stripboard format that is designed to facilitate wiring SMDs (Surface Mount Devices) with conventional components. The board contains popular SMD footprints with fan-outs and easy-to-wire solder pads, colander ground pla...

IDEAL-TEK

ESD-safe circuit board holder, suitable for fitting circuit boards with components. • Adjustable SPLINT height • Three different vertical working positions - 70°, 80°, 90° • Securely locks to work surface • Multiple combinations • Additional splints • Adju...

OXLEY

The KINKY PIN series Plated Through Hole(PTH) Connectors designed specifically to meet the demands of plated through-hole (PTH) technology introduced in printed circuit boards. They tend to be used with flexi-circuit termination and as solder terminals, co...

SEEED STUDIO

The Grove ADXL345 is a small, thin, ultra low power 3-axis accelerometer, providing high resolution (13-bit) measurement at up to ±16 g. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensi...

ETTINGER

005.60.533 is a M3 threaded cube standoff with brass construction and nickel-plated finish. • Dimension is 10mm x 10mm x 10mm

DFROBOT

SEN0497 is a Gravity: DHT20 temperature & humidity sensor for Arduino. DHT20 is a High-precision temperature and humidity sensor, DHT11 upgrade version, the same price but improved performance, using I2C communication, data is more stable. It is used in HV...