Network Testing

TEMPO

Tone Probe 500XP and Tone Generator 600J is a professional quality tone generator and probe suitable for use on telecoms and datacoms networks. TONE PROBE500XP offers seven steps of gain, three different modes for signal filtering, and acAlert™ to protect ...

TENMA

Compact 2-in-1 unit provides standard digital multimeter functions, as well as pin configurations on network and voice cables. Dual pinout indicator provides sequential verification of each pin on a network cable, and the included remote terminator allows ...

AMPROBE - FLUKE

The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of i...

FLUKE NETWORKS

Streamline verification testing: The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wirem...

FLUKE NETWORKS

Streamline verification testing: The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wirem...

TEMPO

Designed specifically for the CATV industry, the Model 402K will send tone through any passive device along the cable path. Now you can tone through splitters, directional couplers and traps. The Model 402K is simple to use and provides fast, accurate resu...

FLUKE NETWORKS

Whether you're an electrical contractor, a home networking professional, datacom specialist or IT/network manager, the Fluke Networks family of powerful Voice/Data/Voice (VDV) verification and troubleshooting tools will allow you to verify your work while ...

TEMPO

Designed for the security and alarm industry, the 620K kit has a latching feature to identify intermittent failures and confirming operation of switches at remote locations. The kit includes: 620 Loop verifier, 200EP inductive amplifier and carry case. • C...

TEMPO

To provide a single wire identification solution for the network professional, Tempo has developed the AT8LK - LAN Toner Kit combining the AT8L LAN Toner and the 200GX Inductive Amplifier n a rugged carrying case. This kit can be used on any wiring system ...

TENMA

Identify or trace wires or cables within a group without having to damage the insulation. Identify faults and states of telephony systems. • Check continuity of cables and wires • Track cables and wires and locate break points • Identify the states of work...

TENMA

This tone & probe set is a basic necessity for anyone running data, voice or any other low voltage cable. It is also suitable for tracing alarm, coax or speaker cables which are already installed. • Quickly trace and identify cables • Provides live telepho...

TREND NETWORKS

LanXPLORER is an in-line network tester with active and passive troubleshooting capabilities for Ethernet connectivity and cabling issues in multi-media environments including copper, fibre and WiFi. In addition to VoiP testing, LanXPLORER provides detaile...

FLUKE NETWORKS

The network tech's vision into cabling bandwidth: CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling ...

TENMA

Network cable tester and tracker. It is widely used in telephone system, computer network, metal wire line inquiry and daily maintenance work. • Unique data transmission technology and anti-interference design • Network wire sequence collation • Breakpoint...

FLUKE NETWORKS

MT-8200-61-TNR is an IntelliTone™ Pro 200 tone generator. The digital and analogue tone generator verifies and troubleshoots copper cabling in networks, identifying the type of service and verifying continuity. The F-type connector supports VDV cables: RJ4...

PEAK

This kit contains a handheld network cable analyser for testing RJ45 (Cat5/5e/6) style network cabling. It also features accessories and adaptors to enable testing of a wide variety of different networks, including telecoms cabling. Any wiring faults are c...

TREND NETWORKS

If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates. By simulating actual network traffic users are able to test and document network and da...

TUK

The POET is a Power over Ethernet tracker which has been designed to detect if an RJ45 outlet has PoE voltage. This is increasingly essential for installers who are unsure as to whether particular patch panel connections or outlets are PoE enabled. • Compa...

TREND NETWORKS

The NaviTEK NT Pro is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface allowing network technicians to pinpoint and solve network connectivity issues faster ...

TREND NETWORKS

The NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper networks. Incorporating an improved graphical interface allowing network technicians to pinpoint and solve network connectivity issues faster than ever befo...

TREND NETWORKS

If you install or maintain data cabling, SignalTEK CT allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates. For installers, this means having a cost-effective way to demonstrate that the copper cabli...

FLUKE NETWORKS

MS-POE is a MicroScanner™ Cable / PoE Tester. MicroScanner™ PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification. The tester detects the available PoE class (0-8) in accordance to the latest PoE standards a...

FLUKE NETWORKS

Technician’s tool for installing and troubleshooting Ethernet devices. • Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD) • Information to investigate potential switch configuration or mal...

FLUKE NETWORKS

LIQ-KIT is a LinkIQ™ cable+network tester kit. LinkIQ validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. The LinkIQ also performs nearest switch diagnosti...

DURATOOL

PoE checker consisting of two parts, an emitter and remote. • Shows information of standard/non-standard PoE devices, e.g. voltage, polarity, mid-span, or end-span • Identifies the type of PoE, either 802.3af or 802.3at standard • Test of real-time power c...