Maker & Circuit Development

SB COMPONENTS

Build a simple and effective data transmission system with your Raspberry Pi Pico. The Expansion board utilises LoRa™ technology for secure, low-power data transmission over longer distances up to 5km. • 868MHz Frequency band • Communication range up to 5k...

RASPBERRY-PI

Short ribbon cable designed to connect any of the standard Pi camera modules to the new Pi Zero v2 model, ideal for integrated camera projects. • 22-pin Pi Zero connector to 15-pin camera connections • Strong and flexible ribbon cable • 150mm Cable length

WHADDA

The WPI410 is a module that allows the use of 3.3V sensors on a 5V microcontroller. • Breadboard compatible design • 2 Inputs/outputs for both 3.3V and 5V sides • Connections: 3.3V, 5V, pass-through, GND • Dimensions: 15x16x15mm

WHADDA

Simple electronic kit to build an LED spinning wheel. Push the button to start the spinning action, speed gradually decreases until one LED remains lit. • 10 Colourful LEDs light up in sequence until spinning stops and one LED remains lit • Simple pushbutt...

SPARKFUN ELECTRONICS

Simple and versatile hub for expanding Qwiic connectivity. The MultiPort provides four Qwiic ports, ideal for devices that only have a single Qwiic port. • Provides 4 easy access Qwiic ports • 2x 4-40 Mounting holes

WHADDA

A simple electronics kit that allows you to build a fully functional metronome. • Built-in speaker and LED that indicate the beat • Volume and bpm (beats per minute) can be adjusted • Built-in on/off switch • Powered by 9V battery (not included) • Supplied...

WHADDA

Compact timer module with wide timing range, LED animation and integrated start/stop buttons. The module also features buffered inputs for remote inputs and relay with 3A max. output. • Wide timing range: 1s to 60h • LED Animation during operation • Onboar...

WHADDA

DIY kit for building a unique effects tool that allows you to creating simple electronic sounds and noises. • 3 Adjustable trimmers for modifying sound • Powerful 2W amplifier onboard • Power Supply: 8-14V DC, 1A • Frequency: 300-6000Hz • Supplied as a kit...

SPARKFUN ELECTRONICS

Compact breakout board based on the LSM6DSO accelerometer and gyroscope sensor; the sensor is capable of detecting shocks, tilt, motion, taps, counting steps and reading the temperature. The breakout features Qwiic connectivity for easy connection without ...

4TRONIX

New and improved version of the original RoboHAT board. The RoboHAT2 Zero is a compact controller board designed for use in a range of Raspberry Pi based robotics projects. The RoboHAT2 Zero provides up to 1A per channel and can use up to 11V. • Provides u...

RASPBERRY-PI

RPI ZERO_W_V2 is a latest product in most affordable range of single-board computers. The board incorporates a quad-core 64bit Arm Cortex-A53 CPU, clocked at 1GHz. At its heart is a Raspberry Pi RP3A0 system-in-package (SiP), integrating a Broadcom BCM2710...

WHADDA

This electronic kit allows you to build a fully functioning code lock, ideal for switching an alarm system on/off or to open a door lock. The code lock features an enclosed operation panel, making it suitable for indoor or outdoor applications. • 4 Digit d...

WHADDA

Simple and effective DIY sensor kit that can be used to measure indoor and outdoor temperatures. • Temperature range: -20°C to 70°C • 2° Full range accuracy • 3 Wire system: GND, +V and OUT • Power Supply: 12V DC (0-5V OUT), 15V DC (0-10V OUT) • Supplied a...

WHADDA

Simple electronic LED effect, just like classic sci-fi TV programmes! One LED scans from side to side and the kit can easily be integrated into other projects or used alone as a fun gadget. • LED Scans from side to side, or in one direction (selectable) • ...

WHADDA

Compact voltage step-up modules that provides stable a 5V USB output from a single LiPo or two alkaline cell batteries. • 2.5V to 5V DC input voltage • Solder pad connections • Supplied as a pack of 2 • Dimensions (HxWxD): 8x16x34mm (each)

SPARKFUN ELECTRONICS

Passive, low profile PIR sensor board that detects movement in close proximity to the sensor. The module features an EKM-series Panasonic PIR combined with an ATTiny84 MCU and Qwiic connectors for easy integration and prototyping. Due to the low current dr...

WHADDA

Unique DIY tool for building circuits that use LEDs. The tester detects LED polarity, measures forward voltage and calculates series resistors required. • Simply hold an LED to the contact pads to start the process • Adjustable target current & voltage • C...

SPARKFUN ELECTRONICS

High performance sensor breakout board that provides non-contact distance readings from 2cm to 400cm. The board is fitted with Qwiic connectors for intuitive I2C communication and daisy-chaining with other Qwiic devices. • Built around the STM8L051 MCU the...

SPARKFUN ELECTRONICS

Simple and effective breakout board for the KX312; the KX132 is a low-power, high resolution three axis digital accelerometer with 16-bit resolution and a wide range of built-in sensing functions. • Free fall, Directional-Tap™, Double-Tap™, device orientat...

KITRONIK

Autonomous robotics platform for Pico. This is a fun and hands-on introduction to buggy robotics. The easy to follow booklet provided with the kit guides you through all of the steps required for you to take control of your robot. The Robotics platform has...

SB COMPONENTS

Simple and effective GPIO adaptor that lets you easily connect any standard GPIO/HAT accessories to the Raspberry Pi 400 so they are correctly orientated. • Provides a full male 2x 20 pin header for HAT connection • Compatible with all Raspberry Pi HATs • ...

PIMORONI

2.0" 18-bit capable IPS Display for Raspberry Pi with 320x240 pixel resolution. The Display HAT Mini is ideal for use as an IoT control panel, digital photo frame or even a compact gaming system! • IPS Display with 65K colours (3:2 ratio, 220 PPI) • Four t...

BBC MICRO:BIT

MEFV22G is a BBC micro:bit Go contains 1x BBC micro:bit V2 board and all the essentials needed to power the board and start programming. This BBC micro:bit is a pocket-sized computer that introduces you to how SW and HW work together. It has an LED light d...

SPARKFUN ELECTRONICS

QwiicBus is a simple and effective solution for extending the range of your I2C bus for your microcontroller by using Ethernet cables. The QwiicBus MidPoint goes between EndPoints to extend I2C range even further or to add additional devices. • Features th...

MAKER MEDIA

The Raspberry Pi is a credit card-sized computer that is capable of many of the things that your desktop PC does, like spreadsheets, word processing, browsing the internet and playing games. But the Raspberry Pi is capable of so much more, and this book ta...