Single Board Computers, Microcontrollers & Add-Ons

BEAGLEBOARD

BeagleBone® AI-64 features Texas Instruments TDA4VM system-on-chip with dual 64bit Arm® Cortex®-A72, C7xDSP and deep learning, vision and multimedia accelerators, 2.0GHz processor. It also has expansion headers compatible with many BeagleBone® cape add-on ...

WHADDA

Compact clock module built around the DS1302 chip that offers both timekeeping and calendar functions and is ideal for integration into a range of projects. The DS1302 delivers real-time operation and features 31 bytes of static RAM and versatile serial in...

WHADDA

The ATmega328P is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. Capable of executing powerful instructions in a single clock cycle, the ATmega328P achieves throughputs close to 1MIPS per MHz. Preloaded with the Arduin...

WHADDA

The WPI304N MicroSD Card Logging Shield is an ideal solution for Arduino applications that require data logging storage or for addressing the limited onboard storage of standard microcontrollers. The Shield supports cards up to 32GB capacity (MicroSDHC) an...

WHADDA

The WPM319 is a simple active buzzer module for use with an Arduino board. Supplied as a pack of two modules. • Active buzzer module for Arduino • Buzzer frequency: 1.5 - 2.5kHz • 3-pin Connection (+ pin is not used) • Operating voltage: 5V DC • Dimensions...

DFROBOT

SEN0497 is a Gravity: DHT20 temperature & humidity sensor for Arduino. DHT20 is a High-precision temperature and humidity sensor, DHT11 upgrade version, the same price but improved performance, using I2C communication, data is more stable. It is used in HV...

DFROBOT

SEN0430 is a Fermion: TMF8801 ToF Distance Ranging Sensor (20-2500mm) (Breakout). The TMF8801 is a time-of-flight distance ranging sensor that uses the time difference between light pulses to measure distance. It provides single zone detection of an object...

WHADDA

The WPSH412 is a 2.8" touchscreen module that is designed to be used with an Arduino Uno or Mega development board. • 240x320 Display resolution • 262K Colour depth • 8080-I /8080-II series MCU with 8/ 9/16/18-bit interface • 6/16/18-bit RGB interface with...

SEEED STUDIO

The Grove VOC and eCO2 Gas Sensor is an air quality sensor. Based on SGP30, this module provides TVOC(Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indo...

ARDUINO

ABX00041 is an Arduino Nano Motor Carrier dev board that is perfect add-on for the Nano 33 IoT board as it works to extend and power up its functionality. Designed to facilitate motor control, Nano Motor Carrier takes care of the electronics required to co...

BBC MICRO:BIT

MEFBATSV1 is a micro:bit battery box (switched). • Dimension is 59mm x 25.79mm

SEEED STUDIO

The Grove temperature, humidity, pressure and gas sensor for Arduinois a multifunction sensor that can measure temperature, pressure, humidity, and gas at the same time. Based on the BME680 module, it can provide you with rich environmental parameters at l...

BEAGLEBOARD

BeagleV®-Fire is a revolutionary SBC powered by the Microchip’s PolarFire® MPFS025T FCVG484E 5x core RISC-V System on Chip (SoC) with FPGA fabric. BeagleV®-Fire opens up new horizons for developers, tinkerers, and the opensource community to explore the va...

RF SOLUTIONS

Easily add RF communication to your Arduino project with this RF shield based on the LAMBDA68 RF module. The shield is perfect for applications that require long range transmission and supports a wide range of encoding options. • LoRa Semtech LLCC68 • Maxi...

WHADDA

The WPM312 from Whadda is a vibration switch module that contains a pull-up resistor. Supplied as a pack of two modules. • Vibration switch with 10kΩ pull-up resistor • 3-pin Connection header; GND, + (middle pin), Data Out (DO) • Operating voltage: 5V DC ...

SB COMPONENTS

The MakerPad Pro is a smart touchscreen display that is perfect as the center of a range of IoT projects. Powered by the ESP32, the board provides WiFi & Bluetooth wireless connectivity as well as a high resolution 2MP camera that enables advanced function...

SEEED STUDIO

The Grove temperature and humidity sensor (SHT31) could be the finest and highest-accuracy humidity sensor you can find, as it can acquire the relative humidity at only ±2% error. On the other side, it also features excellent performance in terms of temper...

WHADDA

The WPI411 is a dual channel, stereo output Class D amplifier module for use with an Arduino board. The module is built around a PAM8403 sound processor and provides 2x 3W power output with up to 85% efficiency. • Dual channel stereo class D amplifier modu...

DFROBOT

SEN0441 is a Fermion: MEMS gas sensor - MiCS-2714 (Breakout). This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample ...

SEEED STUDIO

Seeeduino Mega is a powerful micro-controller derived from Arduino Mega. It features ATmega2560 processor which brings a large number of I/O pins, as much as 70 digital I/O, 16 analogue inputs, 14 PWM, and 4 hardware serial ports. Compared to Arduino Mega,...

DFROBOT

SEN0156 is a Gravity: analogue rotary switch module V1. Rotary switch is often used when more than 2 positions are needed, such as multi-speed control. The rotary switch uses an analogue input to read the 12 state which saves IO resource for the Arduino. •...

SB COMPONENTS

Circular PCB board with 32 right angle WS2812B RGB LEDs that feature integrated drivers. The LEDs are fully compatible with the NeoPixel library and utilise a one-wire communication system, making them ideal for use with controllers that have limited outpu...

WHADDA

The WPSE311 module is built around the DHT11 temperature & humidty sensor complete with a high performance microcontroller attached to ensure reliable results. The module features a calibrated digital signal output with fast results and anti-interference a...

SEEED STUDIO

The V2.2 Solar Charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. You may use various batteries that has the voltage of 3.0V-4.2V to shift up for 5V output, or pu...

KITRONIK

Simple servo driver board solution designed for the micro:bit and is suitable for introductory robotics projects. The board is capable of driving up to 3 servos simultaneously and provides 6 croc-clippable pads for connecting additional devices. Custom Mak...