Single Board Computers, Microcontrollers & Add-Ons

SPARKFUN ELECTRONICS

Simple and effective gamepad-style carrier board that provides several action buttons, allowing for intuitive control over the micro:bit or other devices. The board is also fitted with poke home connectors and a Qwiic connector, allowing for easy integrati...

4TRONIX

The Drive:Bit is a simple, pre-assembled robotics controller board designed for the micro:bit. Utilising the popular DRV8833 driver it is capable of driving two separate motors, perfect for building a cost effective robot. • Ideal for most small motors tha...

KITRONIK

This Inventor's Kit for the micro:bit is the perfect way to get started with programming and hardware interaction with the micro:bit. Progress from Block coding to Python, and the tutorial booklet will walk you through creating the code and circuits. Featu...

KITRONIK

Kitronik LAB:bit educational platform for BBC micro:bit offers a super fun way for children to learn about coding in an engaging and hands-on way. It has been specifically designed for the classroom for KS2 computing and is backed by online MakeCode tutori...

WHADDA

Tactile switch module that contains a push button and a 10K pull-up resistor, ideal for integration into Arduino projects. • Connection: 3-pin male header • Pins: GND (Ground), + (middle pin) and DO (Data out) • Voltage: 5V DC • Features a 10kΩ pull-up res...

WHADDA

The WPSE320 is an analogue temperature sensor module utilising a thermistor where the resistance is dependent on temperature. • NTC Type: NTC-MF52 3950 • Temperature range: -55°C to 125°C • Features a 10kΩ pull-up resistor • Connection: 3-pin male header •...

KITRONIK

Kitronik :VIEW Graphics128 OLED display 128x64 for BBC micro:bit. The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The on-board edge connector allows the micro:bit to slot into...

WHADDA

Compact IR receiver module designed for infrared remote control and similar applications that require improved ambient light rejection. • Photo detector and preamplifier in one package • Internal filter for PCM frequency • Inner shield provides good anti-i...

WHADDA

A Reed contact switch with a normally open contact which closes in the presence of a magnetic field. Supplied as a pack of 2 modules. • Each module contains a 10kΩ pull-up resistor • 3-pin Connection: +(middle pin), -(ground), S (Signal) • Voltage: 5V DC •...

SCIENCESCOPE

The micro:bit can be programmed using the ScienceScope sound cable to turn speakers on and off very fast at varied frequencies, which creates specific musical notes. The sound cable enables you to connect the micro:bit to a set of headphones, speakers or a...

CYTRON

The Arduino Maker UNO Plus has been designed specifically to simplify Arduino for Education. Learn about and construct electronic circuits and explore physical computing. Traditional Arduino boards can make the task of troubleshooting circuits that don't w...

CYTRON

The EDU:bit is specially designed to encourage experimentation with STEM/STEAM topics and learning to code with the micro:bit in a fun and engaging way. The kit includes a full colour tutorial booklet which is carefully structured to introduce programming ...

SEEED STUDIO

The Grove AHT20 I2C industrial grade temperature and humidity sensor is a new generation of temperature and humidity sensor embedded with a dual-row flat and no-lead SMD package, suitable for the reflow soldering. AHT20 is equipped with a newly designed AS...

SEEED STUDIO

The CANBed Arduino CAN-BUS development kit carries an ATmega32U4 chip alongside the MCP2515 and MCP2551 CAN-BUS controller and transceiver, which combines the CAN-BUS Shield and Arduino Development Board together on a single board. • ATmega32U4 with Ardui...

SEEED STUDIO

Seeeduino Nano is a compact board similar to the Seeeduino V4.2/Arduino UNO, and it is fully compatible with Arduino Nano on pinout and sizes. • 43mm x 18mm tiny board • 16M ATmega328P AVR microcontroller • Fully compatible with Arduino Nano • USB-C for pr...

MONKMAKES

Simple solid-state switch designed for the micro:bit. The switch allows an output from a micro:bit to turn low voltage devices on/off and can be used with light bulbs, motors and small heating elements. • Use an output from a micro:bit to turn low voltage ...

DFROBOT

SEN0460 is a Gravity: PM2.5 air quality sensor that can measure particulate matter like PM2.5, PM1.0, PM10. With easy-to-use Gravity interface, the air quality sensor works well with most main-controllers. • Laser scattering principle, accurate measurement...

WHADDA

Convenient dual sensor package that includes both water level and soil moisture sensors for integration into Arduino projects. When a sensor detects water, an analogue value will be available on the SIG connection. • Dual sensor package that includes both ...

DFROBOT

DFR0471 is a 32x16 RGB LED matrix panel. It has 512 full-colour RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. • 5VDC operating voltage • Maximum power consumption i...

DFROBOT

DFR0830 is a Gravity: digital 360° tilt sensor for Arduino. This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a sim...

SEEED STUDIO

The Grove shield for Arduino nano provides you a simple way to connect with Arduino Nano and also Seeeduino Nano. This shield help you get rid of breadboard and jumper wires by pulling out the pins of the motherboard and expands to 8 Grove connectors. V1.1...

BEAGLEBOARD

BeagleConnect Freedom is an open-hardware wireless hardware platform developed by BeagleBoard.org and built around the TI CC1352P7 microcontroller, which supports both 2.4GHz and long-range, low-power Sub-1 GHz wireless protocols. Rapidly prototyping of Io...

WHADDA

The Whadda WPI302 allows you to easily integrate a microcontroller into a Bluetooth network. • CSR (Cambridge Silicon Radio) BC417 Chip with Bluetooth v2.0 • 2.45GHz Frequency • Asynchronous speed: 2.1Mb/s (max) • Bluetooth serial port profile • Power supp...

SB COMPONENTS

Colourful IPS display breakout that is perfect for adding a user interface or feedback system to your project. The display provides 65K RGB colours at 240x135 resolution and is based on the ST7789 driver. The versatile breakout supports both 3.3V and 5V op...

DFROBOT

MBT0021-EN-18650 is a micro:Maqueen Plus V2 (18650 Battery) - an Advanced STEM Education Robot for micro:bit. Optimized with more expansion ports, larger capacity power supply, and larger body, it is fully compatible with more peripheral components like Hu...