Networking Hardware

TUK

Low profile UTP outlet with shuttered socket • Fully performs to Cat6 at component level • Compatible with most 86x86 Euro faceplates • Industry standard Krone (LSA+) IDC connectors • Conforms to TIA/EIA-568-B.2 specification

TUK

24 Port unpopulated patch panel with a 0.5U frame designed for high density installations (such as Cat 6 and Cat 6A). • SPCC Panel with attractive nickel-plated finish • Suitable for shielded or unshielded keystones up to 17.2mm wide • Mounts in any standa...

LMS DATA

This low cost, high performance 12-port Cat5e patch panel features quality components with full independent testing up to Gigabit Ethernet (1000BaseT) standards. • Also backward compatible with existing cabling infrastructure including running 10BaseT and ...

PRO SIGNAL

24 Port punch down patch panel for Cat 5e connections. Ideal for effective network management with cable management bar and clear labelling. • Meets TIA/EIA-568-B.2 requirements for Cat 5e performance • Supports T568 A&B wiring and easy installation • Dual...

TUK

High performance Cat 5e coupler panel that mounts to any 19" rack, cabinet or wall bracket • Robust metal keystone panel supplied preassembled with 24 Cat 5e couplers • Cold-rolled 1.5mm steel sheet front panel (painted black) and nickel plated rear panel ...

CONNECTIX CABLING SYSTEMS

1U Cat6 coupler panel with 24 ports in high density format • Panel mounted RJ45 plug-to-plug connections • Mild steel construction with black powder finish • Front and rear sockets to facilitate through coupling • Conforms to ANSI/TIA-568-C Enhanced Catego...

TUK

Durable weatherproof housing with a UK PSTN voice socket designed to allow voice cabling to be used in external locations. • Ideal for use in camping sites, trade fair grounds and damp or dusty industrial environments • IP65 Rated enclosure and cable gland...

TUK

High quality Slave UK voice module • Low profile shuttered design • Designed to complement standard Cat 5/6 modules • UL94HB White ABS construction

D-LINK

The DPE-302GE allows you to easily extend your PoE connections and provides data and up to 28W of power to two PoE ports for powering PoE/PoE+ devices such as IP cameras or wireless access points. With multiple units you can exceed the standard limitation ...

TUK

16 Port empty keystone patch panel that will mount in any standard 19" rack, cabinet or wall bracket. Designed to be compatible with a wide range of keystones up to 27mm wide. • Pre-numbered ports with labelling facility • Suitable for use with shielded an...

CLIFF ELECTRONIC COMPONENTS

1U panel loaded with 16x XLR 3DCM • M3 holes • Front mounted

D-LINK

The DPE-101GI PoE injector provides a power and data connection to a remote PoE device such as an IP camera or wireless access point, making it a cost effective solution for installing PoE devices where a mains socket is not available. • Supplies power and...

TUK

High performance 12 way Cat6 10" patch panel, fitted with LSA/110 style IDC connections. Designed for installation in the miniMEDIA range of 10" cabinets, ideal for home or small office multimedia installations. • Cat6 EIA/TIA 568B permanent link standard ...

CLIFF ELECTRONIC COMPONENTS

The CP30151 1U XLR Feedthrough Connector Rack Mounting Patch Panel from Cliff Electronic Components is unloaded with 16 x 24mm diameter holes to accept XLR-format feedthrough connectors. Features four M3x0.50 mounting holes. Supplied with a connector label...

TUK

High quality, euro-sized PABX UK voice module • Low profile shuttered design • Designed to complement standard Cat 5/6 modules • Black ABS construction • Integral cable tie facility (cable tie included) • Dimensions (HxWxD): 50x25x20mm

KAUDEN

High quality single gang faceplate designed for data connections at home or office. This model has a single RJ45 port for Cat 6 systems. • Performs to UK/EU standard BS EN 50173-6 • Standard IDC terminals, colour coded for 568B • UL94-V2 Flame retardant pl...

KAUDEN

• Cat6 performance and backwards compatible with Cat5e • Hi profile Krone type IDC terminals to prevent cable getting crushed by punch down tool • Colour coded wiring diagram on rear of panel • Ideal for our KAUDEN small 4U and 8U SOHO cabinet • Includes ...

CLIFF ELECTRONIC COMPONENTS

1U panel loaded with 16x 50Ω insulated BNC connectors. • M3 holes • Front mounted

TUK

Easily install external Cat6a outlets without the need for additional back boxes or trunking. Fitted with fully shielded Cat6a keystones that feature simple, tool-less termination. • High performance data throughput with Cat6 transfer rates at permanent li...

TUK

Easily install external Cat8 outlets without the need for additional back boxes or trunking. Fitted with fully shielded Cat8 keystones that feature rapid, tool-less termination. • Meets ANSI/TIA 568-C.2-1 compliance specifications for Cat8 cabling systems ...

TUK

High quality, euro-sized PSTN master UK voice module • Low profile shuttered design • Designed to complement standard Cat 5/6 modules • Black ABS construction • Integral cable tie facility (cable tie included) • Dimensions (HxWxD): 50x25x20mm

TUK

Easily install external Cat8 outlets without the need for additional back boxes or trunking. Fitted with fully shielded Cat8 keystones that feature rapid, tool-less termination. • Meets ANSI/TIA 568-C.2-1 compliance specifications for Cat8 cabling systems ...

CLIFF ELECTRONIC COMPONENTS

The CP30186 from CLIFF is a 1U panel loaded with 16 75Ω gold, insulated BNC feedthrough connectors. • 16 Holes of 24mm Ø with cable bar and label strip • Supplied with a cable strain-relief bar and paper identification strip • Dimensions (LxW): 482.6x44mm

TUK

24 Port patch panel that features the TUK LOKJAC locking mechanism; designed to ensure safety and security for connected devices whilst preventing unauthorised access to unused ports. • High performance throughput, meets Cat6 transfer rates at permanent li...

D-LINK

The DPE-301GI PoE injector provides data and up to 30W of power to a remote PoE device such as an IP camera or wireless access point, making it a cost effective solution for installing PoE/PoE+ devices where a mains socket is not available. • Supplies powe...