Kits & Modules

CEBEK

A power supply for use with a CEBEK model kits. It is an open frame design with the transformer inserted on the PCB and DIN-rail format. • Rating: 12V, 270mA

BENTLEY SECURITY PROJECTS

• Driven by an input of 9.5V to 30V AC or DC • Controllable from low current source using transistorised trigger inputs • Capable of switching over 1kW of mains lighting • Transistored input trigger can be both Positive and Negative. • No cutting of links...

KEMO ELECTRONIC

This power control module can control resistive inductive loads such as motors, heaters (if they are phase controllable). • Operating voltage: 110-240Vdc • Loading capacity: 230Vac @4000VA • Mximum load: 18A (when mounted on heatsink) • Regulation: phase c...

KEMO ELECTRONIC

This DC voltage converter transforms a high input voltage (24V/DC) into a low voltage output (12V/DC). This product is the ideal solution for 24V trucks/boats where you need to run 12V/DC devices. This module is short circuit proof and shock proof. • Input...

CEBEK

A 2 channel remote control transmitter module designed to send codified signals to a receiver module from a distance of 25 metres, to control the connection and disconnection of both outputs. Due to an in-built, 8-bit micro switch, the transmitter modules ...

INTERFACE SOLUTIONS

Simple, low cost and versatile module that is ideal for use with radio controlled transmitter receivers to operate gates, doors, barriers, CCTV cameras and alarm systems. It has been designed for 12 or 24V dc operation and has a double pole relay rated at ...

WHADDA

• No pushbuttons required, simply shake dice • Rolls out slowly and flashes the last combination • Microprocessor controlled • Auto power off • Easy to assemble • Power supply: 3V lithium CR2032 type battery (not included) • Dimensions (WxHxD): 36x32x36mm...

KEMO ELECTRONIC

• Robust amplifier modules for universal use • Encapsulating modules are humidity-proof and shake-proof • Encapsulating compound is highly heat-conductive plastic so no additional heat sinks ar eneeded • Protected electronically against overheating and ov...

KEMO ELECTRONIC

Two stage preamplifier for high-power amplifiers, headphones amplifier, etc. Supplied in kit form. • Operating voltage: 12-30Vdc • Super wideband: 10Hz-150kHz • Input sensitivity: 2-20mV • Output: 200mV-2V • Dimensions: 54x29mm

UNBRANDED

This versatile version of the handy little relay gives a latching toggled on/off action that is activated by a trigger signal. The first input signal turns it on, a second turns it off. This module is ideal for use in conjunction with radio transmitter/ re...

CEBEK

A 1 channel receiver module with single relay output. The module is designed to receive and decode signals sent by two remote control transmitters from a distance of up to 30m, allowing connection and disconnection of both outputs. This standard receiver w...

CEBEK

A stereo amplifier with an output impedance of 4-8Ω and requires a 12V dc power supply. It has an input impedance of 100kΩ. • 2x 0.5W amplifier • Current consumption: 100mA • Input signal: 50mV • Frequency response: 30Hz-18kHz • Dimensions (HxWxD): 15x55x4...

WHADDA

This circuit converts DC voltage into a series of pulses which are proportional in duration to the input voltage. Protected against short circuit protection. • Power supply: 8 to 35Vdc • Maximum output current: 6.5A • Dimensions (HxWxD): 45x85x48mm

CEBEK

A mono amplifier which has an output impedance of 4-8Ω. • Power rating: 5W • Power supply: 12Vdc • Current consumption: 250mA • Input signal: 100mV • Frequency: 30Hz-18kHz • Dimensions (HxWxD): 50x40x20mm

CEBEK

A sound activated, relay switch module with integral microphone. When the module receives a signal, the relay output is automatically connected for the whole time the signal is being received. It will accept any audio signal up to 5A. The module includes a...

WHADDA

• Counts up or down • Count input through on-board push buttons or by external pulses • Display modes: Normal or Time (hours/minutes, minutes/seconds) • Internal oscillator allows time measurement • Programmable pre-set value with equal output • Selectabl...

CEBEK

A speed regulator designed to adjust the speed of single-phase, universal DC motors with 6V-16V DC supply. The speed adjustment is controlled through a Transistor output and potentiometer built into the PCB. This module will not accept inductive loads. • L...

KEMO ELECTRONIC

The infrared spotlight allows CCD cameras to operate in complete darkness. The human eye is not senstive to infrared but CCD cameras are, making infrared illumination perfect for inconspicuous observation of entrances, drives etc. Other applications inclu...

CEBEK

A 2 channel receiver module with dual relay output. The module is designed to receive and decode signals sent by two remote control transmitters from a distance of up to 30 metres, allowing connection and disconnection of both outputs. This two- touch type...

CEBEK

Timer module, which when activated, waits a pre-determined time before switching ‘On' a relay. This relay will then stay ‘On' for a pre-determined time. An LED indicates that the timer is in operation. The circuits are reverse polarity protected. • Operati...

KEMO ELECTRONIC

• Robust amplifier modules for universal use • Encapsulating modules are humidity-proof and shake-proof • Encapsulating compound is highly heat-conductive plastic so no additional heat sinks ar eneeded • Protected electronically against overheating and ov...

CEBEK

A 2 channel remote control transmitter module designed to send codified signals to a receiver module from a distance of 100 metres, to control the connection and disconnection of both outputs. Due to an in-built, 8-bit micro switch, the transmitter modules...

KEMO ELECTRONIC

This module is a universal stereo amplifier with a wattage output of 2 x 1.5W. • Operating voltage: 3-10Vdc • Loudspeaker socket: 8-32Ω • Input sensitivity: <lt/>100mV • Frequency response: 20-20000Hz • Dimensions: 60x45x20mm

WHADDA

An easy-to-build kit that acts as a simple sound level meter. • Microphone incorporated • Adjustable sensitivity • Requires 3V CR2032 battery (not supplied)

CEBEK

A 2 channel transmitter module designed to send codified signals to receiver modules from a distance of up to 100m, to control the connection and disconnection of both outputs. The transmitter module can be codified to up to 13,122 trinary combinations, du...