Test Equipment

FLUKE

A pair of high quality test leads that are designed to improve steadiness in slippery hands. • Silicone, isolated test leads for maximum flexibility and resistance to high and low temperatures • 1.5m extension leads • Suitable for use with the SureGrip™ ra...

HIRSCHMANN TEST AND MEASUREMENT

• Contact protected measuring lead 1mm² • 4mm diameter plug insulated by latching and sprung insulating sleeve • Plug released by pressure on the side-mounted locking spring • Highly flexible PVC insulation • Impedance: 40mΩ • Length: 2m • Colour: yellow

EXTECH INSTRUMENTS

The CT20 is a Remote and Local Continuity Tester with one person operation for wire and cable testing. A bright flashing LED and loud pulsating beeper indicate local continuity. Remote continuity features the use of the remote probe, it does not tie-up two...

UNBRANDED

A highly efficient test tool for quickly locating short circuits on PCBs. The unit is designed as an aid for finding the most difficult fault on PCBs which is a short across two tracks that travels across a large a part of the board e.g. ICs. The unit emit...

SOCKET & SEE

The 13A professional socket tester has features that allow quick and safe testing. Different faults are indicated via the hi-brightness LEDs with audible indications. • Warbling tone indicates faulty wiring • Advanced electronics allow clear indications ev...

FLUKE

A pair of high quality test probes that are designed to improve steadiness in slippery hands. They include over-moulded surfaces and finger hugging curves to give the user a comfortable, reliable grip allowing them to focus on accurate measurements. • Red ...

EXTECH INSTRUMENTS

The PH100 is a stick style pH meter with a built-in smart chip that offers advanced functions and features not found anywhere else. • CAL feature that tells you when it’s time to recalibrate your meter • Flat surface pH electrode is completely waterproof a...

AIM-TTI INSTRUMENTS

The TTi PowerFlex design of the CPX series enables higher currents to be generated at lower voltages within an overall power limit envelope. Each output can provide twice as much current as a conventional PSU of the same maximum voltage and power (see the ...

HANNA INSTRUMENTS

A practical folding probe thermometer with high accuracy and ‘Cal-Check’ feature to monitor the accuracy of the instrument. No switches, the thermometer is turned on/off by opening and closing the probe. When not in use the probe is safely retracted into t...

TENMA

Test leads terminating in insulated crocodile clips. • Supplied in pairs (red and black) • Voltage rating: 30V AC, 60V DC

FLUKE

A superior quality, general purpose multimeter with a blend of precision, comprehensive features, combined with tested ease-of-use, safety and reliability. The removable protective holster protects the instrument against harsh environments and features a b...

PEAK

• Atlas ATPK2 dual DCA and LCR component analyser kit • Dual instrument pack for electronic hobbyists, technicians, bench engineers, manufacturing & QA • Comprising of the Peak Atlas DCA55 and LCR40 component analysers • Designed to enhance fault finding ...

FLUKE

A test/log book for use when PAT testing.

TESTO

Testo 410-1 measures air speed and temperature. It is ideal for quick spot checks at air outlets on account of its integrated measurement with the 40mm vane. Timed mean calculation is possible. In addition to air speed and temperature, testo 410-2 also mea...

TENMA

A pair of red and black fused test leads for connection to shrouded 4mm sockets commonly found on hand-held test equipment. • Can be pushed securely into a 4mm banana socket • Flexible cable • Fuse rating: 500mA, 1000V • Length: 1.2m • CAT III 1000V

MOLEX

• Innovative 3-in-1 design features modular jacks for USOC, 568A/B unshielded/shielded cabling systems • Accurately verifies the continuity and sequence of 1, 2, 3 and 4 pair channels • Ergonomically designed, lightweight and rugged • Features master and ...

MEGGER

The MIT220 is one of the smallest insulation testers. With options of a two voltage, or three voltage instrument, the MIT200 instruments offer a range of safety and operation features expected from a Megger instrument • Insulation testing to 1000MΩ • Conti...

SAGAB

A non-contact instrument for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. Applying the tip of the Voltstick to the equipment area/ cable to be tested,...

UNBRANDED

• Show unauthorised opening of plugs following formal visual inspection • Leave a mark to indicate if someone has opened the plug • Shows the value of the fuse • Size: 20 x 10mm • Pack contains: • 100 x 3A labels • 100 x 5A labels • 300 x 13A labels

TENMA

This Audio impedance meter is essential for reliable installation of background music and paging systems in residences, offices buildings and public areas. Avoid costly service calls and amplifier damage by verifying actual speaker system impedance prior t...

LASER

• Designed to include the usage of 42V used on hybrid cars • Suitable for 12V-42V hybrid and standard fuel cars • Automatic voltage identification • Simply select Blue for 12V and Red for 42V (indicated with super bright LEDs) • Safe on low current circui...

HIRSCHMANN TEST AND MEASUREMENT

• 4mm straight safety plugs at both ends • Nickel-plated copper beryllium spring contact • Highly flexible, double insulated, stranded lead • Shatterproof plugs with integrated kink protection • Cable material: PVC • Safety standard: IEC 61010 1000V Cat I...

MULTICOMP PRO

The 76-016 from Tenma is a red coloured straight 4mm male banana plug to straight 4mm male banana plug lead. It is in according to EN / IEC 61010-031:2008 :1000V CAT II / 1000V CAT III / 600V CAT IV, reinforced insulation, 12A (at +40°C) electrical safety....

PEAK

A pair of surface mount tweezers for use with Peak Atlas component testers. • Tweezers for use with the Atlas LCR Passive Component Analyser (with 2mm connectors) • Gold-plated tips are suitable for testing a very wide range of surface mount components • d...

FLUKE

FLUKE IR189USB is an USB cable adaptor for use with Fluke 18X and 28X series digital multimeters. • Enables the downloading of software and data • 1.5m long cable for extended reach • Durable and reliable construction for professional use