Maker & Circuit Development

ULTIMAKER

The 1637 from Ultimaker is a CPE (co-polyester) M0188 yellow colour filament. CPE (co-polyester) materials are chemical resistant, strong, tough and demonstrate good dimensional stability. Features excellent chemical resistance, toughness and dimensional s...

ARDUINO

ASX00005 Arduino MKR CAN SHIELD can easily connect to a CAN (Controller Area Network) bus. The MKR CAN shield can simplify the connection of the MKR boards with industrial systems and especially with automotive applications. This shield opens a new set of ...

4TRONIX

The Bit:2:Pi enables you to re-use all those hundreds of Raspberry Pi addon boards and HATs. Simply plug your Micro:Bit into the edge connector and the required Raspberry Pi Hat onto the GPIO connector, then program your Micro:Bit to control the new board....

KITRONIK

The GAME ZIP 64 is a unique, all-in-one handheld gaming device for the micro:bit. The GAME ZIP is fully programmable and makes for the perfect platform for developing and testing micro:bit games. • Colourful display made from 64 individually addressable Zi...

DFROBOT

Basic sensor kit that is suitable for adding to Arduino projects. The set includes a range of sensors including light, touch, temperature, tilt, greyscale and magnetic sensors. • Includes 9 modules that cover a range of general applications • The IO Expans...

CYNTECH COMPONENTS

This kit enables you to convert your Raspberry Pi into a word clock, including mounting for the Pi inside to give a neat appearance. • Compatible with Raspberry Pi Zero, Raspberry Pi 3, Raspberry Pi 2 and Raspberry Pi B+ • Can hold an RGB LED panel to disp...

CIF

Conductive Rack for PCB storage with a simple design that has 25 slots and can be used in high temperature environments. • 25 PCB Slots (2x 15mm on 7mm pitch) • Can be used at temperatures up to 300°C • Suitable for use in drying cabinets • Metal construct...

NXP

FRDM-KW24D512 is a Freedom development board for Kinetis KW21D, KW22D and KW24D MCUs. The FRDM-KW24D512 is a development platform based on the MKW24D512 Kinetis® W Series microcontroller and is enabled by software support for Thread, ZigBee Pro, 802.15.4 M...

WILEY

The Arduino benefits from the popularity of open-source projects that inspire even the major technology companies to develop compatible products. This book is a practical guide to programming the Arduino, accessible to technology lovers at any level. It pr...

ULTIMAKER

The 1635 from Ultimaker is a CPE (co-polyester) M0188 red colour filament. CPE (co-polyester) materials are chemical resistant, strong, tough and demonstrate good dimensional stability. Features excellent chemical resistance, toughness and dimensional stab...

MULTICOMP

The MC001796 from Multicomp is a matrix board. • Dimension is 100mm x 100mm x 1.2mm • 1368 holes with 2.54mm (0.1inch) pitch spacing and 1mm hole diameter • Multicomp products are rated 4.6 out of 5 stars • 12 month limited warranty *view Terms & Condition...

PIMORONI

The Pibow Coupé is a slim and hackable case for the Raspberry Pi. Crafted out of five unique layers, including a transparent top and base panel that leaves your Pi visible inside. Each layer is laser-cut from colourful cast acrylic and once stacked they se...

ULTIMAKER

The 1626 from Ultimaker is an ABS (acrylonitrile butadiene styrene) M2560 pearl gold colour filament. It is specifically formulated to minimize warping and ensure consistent interlayer adhesion. Features excellent mechanical properties and interlayer adhes...

NXP

The LFSTBEB845X is an evaluation board for the MMA845X family of three axis high performance, high functionality low g accelerometers. The kit includes daughter boards for each of the three devices in this family MMA8451Q, MMA8452Q and MMA8453Q. For custom...

WHADDA

Simple and effective tool for converting ultrasonic sounds into audible sound for humans, ideal for studying bats and electrical inspections where the detection of ultrasound is involved. Images show fully assembled unit, the product is supplied in kit for...

TEXAS INSTRUMENTS

The DK-TM4C129X is a Tiva C series TM4C129x connected development kit. The TM4C129x Tiva C series microcontroller provide designers a high performance ARM Cortex-M-based architecture with a broad set of integration capabilities and a strong ecosystem of so...

SNAP CIRCUITS

For use with SC3Di 3D Illumination kit • Mini base grid (7.7" x 5.5")

ARDUINO

GPS Module for MKR boards that is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module and is designed to work with different positioning services concurrently. It receives and processes signals from GPS, GLONASS & Galileo services ...

PIMORONI

The Mini Black HAT Hack3r allows access to all the GPIO pins while also running a HAT board. This makes it ideal for debugging your HAT projects or combining a HAT with other circuits. This version is supplied in kit form and requires assembly. • Useful if...

ULTIMAKER

• Nylon filament is a polyamide grade based on PA6/6 • Features reduced humidity absorption and a longer shelf life compared to other nylon filaments • Industrial-grade impact and abrasion resistance • Good ductility (210% elongation at break) • Low frict...

IDEAL-TEK

Sliding rail for use with the Ideal-Tek PCSA-2 and PCSA-4 circuit board holders.

ULTIMAKER

The 1639 from Ultimaker is a CPE (co-polyester) M0188 transparent colour filament. CPE (co-polyester) materials are chemical resistant, strong, tough and demonstrate good dimensional stability. Features excellent chemical resistance, toughness and dimensio...

CYNTECH COMPONENTS

The WeatherHAT turns your Raspberry Pi into a handy weather display, perfect for showing weather at the moment, a day in advance or on an upcoming holiday. It can also be used to create interactive games to provide an extra dimension of play. • 7 RGB LEDs ...

DURATOOL

Female to female threaded, Zinc plated Steel spacer. • Duratool products are rated 4.1 out of 5 stars • 12 month limited warranty *view Terms & Conditions for details

MIKROELEKTRONIKA