Mains Socket Testers

KEWTECH

Socket tester checks the important parameters for safe wiring, it places a cost effective solution in the hands of many more users at the front end of responsibility and care. Includes a standard socket test (checks the wiring configuration at the socket),...

SOCKET & SEE

• The first socket tester to also test true earth loop impedance • Easy Colour LED read out system gives earth loop result as Good/Check or Urgent Check • Compact design encourages more frequent socket safety checks • Full earth loop test • Audible tone i...

SOCKET & SEE

The 13A professional socket tester has features that allow quick and safe testing. Different faults are indicated via the hi-brightness LEDs with audible indications on the Craftsman and Professional models. • Patented ‘Fault Locate’ electronics gives a cl...

TENMA

This mains socket tester is a quick and easy way to tell if your sockets are safe to use. • Clear LED indication of wiring status • Audible indication of wiring condition • Modern ergonomic design with soft finger grip • Wiring conditions reported: Correct...

SOCKET & SEE

• The first socket tester to also test true earth loop impedance • Easy Colour LED read out system gives earth loop result as Good/Check or Urgent Check • Compact design encourages more frequent socket safety checks • Full earth loop test • Audible tone i...

SOCKET & SEE

The 13A professional socket tester has features that allow quick and safe testing. Different faults are indicated via the hi-brightness LEDs with audible indications. • Warbling tone indicates faulty wiring • Advanced electronics allow clear indications ev...

PRO ELEC

Suitable for testing the wiring correctness of a standard 13A trailing socket. • LED indication of wiring status • 200-250V rated voltage • UK mains plug (type G), as used in the UK, IRL, Cyprus, Saudi Arabia, Malta and many others.

MARTINDALE ELECTRIC

The Buzz IT is a fast and easy way to ensure 13A sockets are wired correctly in the same way as the classic check plug. The Buzz It gives an audible signal in addition to the three neon lights when the wiring is correct. This allows for awkwardly placed, o...

KEWTECH

KEWCHECKR2 is a socket adapter allows you to easily perform testing of the internal wiring configurations of sockets. • For fast connection of 4mm test lead connectors • Takes away the need to remove socket from wall • Enables superior test results due to ...

KEWTECH

Kewcheck 103 is a three-pin socket testing device designed to give quick and easy indication of the status of a socket's internal wiring without the need to remove the socket panel from the wall. • High definition green LEDs with clear audible tone • Error...

MARTINDALE ELECTRIC

The PC105 is a 3-phase socket tester for checking supply faults and incorrect wiring of CEE 5-pin socket outlets. It will check for phase presence, phase sequence, PE presence and also checks for neutral presence. • 5-Pin configuration • 7x Wiring conditio...

MARTINDALE ELECTRIC

The PC105 is a 3-phase socket tester for checking supply faults and incorrect wiring of CEE 5-pin socket outlets. It will check for phase presence, phase sequence, PE presence and also checks for neutral presence. • 5-Pin configuration • 7x Wiring conditio...

MARTINDALE ELECTRIC

The CP301 is an industrial socket tester for instantly checking sockets on 110V centre tapped circuits. Fitted with a yellow 110V, 16A CT plug to BS 4343/IEC309 and provides similar fail-safe LED indication as the classic check plug. • Invaluable for insta...

MARTINDALE ELECTRIC

The EZ365 not only detects fault conditions and check the mains voltage level, it also shows how safe the earth wiring is by carrying out a non-trip earth loop test and indicating its value in 6x discrete ranges from less than 1.7Ω to 500Ω. • Quick and eas...

KEWTECH

The KEW3PH 3-Phase Adaptor for continuity, insulation and loop testing of 3-phase circuits. Just fit your own industrial plug. • For live and dead testing • Ensures fast and secure connections of 4mm test lead connectors • Colours referenced to old and new...

MARTINDALE ELECTRIC

The EZ165 not only detects fault conditions and check the mains voltage level, it also shows how safe the earth wiring is by carrying out a non-trip earth loop test and indicating its value in 6x discrete ranges from less than 1.7Ω to 500Ω. • Quick and eas...

FLUKE

ST240+/UK is a RCD socket tester with beeper checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Able to identify ...

SOCKET & SEE

This kit provides a complete solution for testing 16A and 32A industrial sockets (230V, 3-pin). • Includes Socket & See SOK40 and ADP40 32A adaptor • Test both 16A and 32A industrial sockets • Suitable for testing 230V 16A and 32A 3-pin systems • Complete ...

SOCKET & SEE

This kit provides a complete solution for testing 16A and 32A industrial sockets (110V, 3-pin). • Includes Socket & See SOK50 and ADP50 32A adaptor • Test both 16A and 32A industrial sockets • Suitable for testing 110V 16A and 32A 3-pin systems • Complete ...

SOCKET & SEE

The Socket & See SOK50/16HD 110V Industrial Socket Tester is a sturdy, heavy duty tester specifically designed for UK 55-0-55V (110V) construction sites. It clearly indicates the position of L1, L2 and Centre Tap, plus when used with the Socket & See ADP50...

MULTICOMP PRO

MP780682 from Multicomp Pro is a UK socket tester, suitable for checking socket wiring errors and widely used within commercial and residential areas. • 230V operating voltage • <lt/>18mA operating current • 50Hz - 60Hz operating frequency • Indications: c...

MARTINDALE ELECTRIC

The BZ701 not only detects 28 socket wiring fault conditions and checks the mains voltage level, it also safely detects Line-Neutral reversal (cross polarity) at the incoming supply. The polarity swap test detects a serious fault condition that cannot be i...

CLIFF ELECTRONIC COMPONENTS

The CL18303 is a 3-phase Quicktest QT3 designed for temporary, safe and efficient connection of un-terminated cables to 440VAC, three-phase power supplies. It has a maximum rating of 16A. It is also designed for use in applications including manufacturing,...

SOCKET & SEE

The Socket & See SOK ADP65 Industrial Socket Tester Adaptor is an essential tool designed to bridge the gap between 16A socket testers and 32A sockets on 400V systems. This adapter is perfectly compatible with the Socket & See SOK65 5-pin socket tester, of...

SOCKET & SEE

The SOK DSO is an essential tool for electricity distribution companies in detecting cross polarities in the customer supply. Its unique TruPol feature ensures accurate results by requiring users to press the test button to establish a ground reference bef...