Test Equipment

KEWTECH

Electrical installation condition report made for use with Kewtech's TC5 and TC6 certification books. • Electrical installation condition report for supplies up to 100A  • Use with the test schedules TC5 for up to 12 ways or TC6 for greater than 12 ways • ...

MARTINDALE ELECTRIC

The VI13800 is a safety voltage indicator which contains a high wattage resistor in the probe which limits the current in the event of damage to the cable, ensuring better protection than with a fuse. • Two pole voltage indicator • Bright LEDs for clear in...

MULTICOMP PRO

Programmable DC power supply for use in educational institutions, laboratories, design, testing and manufacturing industries. Remote monitoring and control of this power supply is possible through the RS232 or USB interface. • Complete digital control / pr...

FLUKE

FLUKE C101 is a hard carrying case that offers a virtually indestructible and convenient way to carry your tools and accessories. Fluke cases are constructed out of heavy-duty plastics that’s easy to clean and protects your tools from many types of conditi...

BRANNAN

LO-tox® is an organic filling specifically chosen to achieve a wide temperature span and provide the lowest practical levels of hazard, making it an ideal substitute for a mercury thermometer. • Glass tube with blue kerosene filling • Non-roll end cap with...

IDEAL-TEK

Smart Tweezers™ is a handheld LCR meter for testing and identification of Surface Mount Devices (SMD) as well as trouble shooting of complex electronic systems. • Built-in high-precision LCR probe • Convenient one-hand operation • Ideal for Surface Mount D...

TENMA

• A quick Go/No Go tester for automotive relays • Indication of general health & functioning of most common automotive relays • Checks the control side of the relay by applying signal to the relay coil • Operates the relay several times during each test s...

HIRSCHMANN TEST AND MEASUREMENT

Test probe with insulating sleeve and slender, sprung stainless steel tip. This allows a constant pressure to be applied without the tip slipping off the component, even in the smallest measuring points. 4 mm diameter brass socket connection. component par...

HANNA INSTRUMENTS

With its high accuracy and low level detection at the touch of a button, the Hanna Phosphate Checker helps to detect phosphate at levels that most chemical test kits would be able to detect or give accurate readings of. By monitoring phosphates at a low le...

SALTER

A set of large capacity bench scales featuring four full load bridge load cells and self levelling feet. • 5½ digit, 17mm high LCD display • Measurement in kg and lb • Stainless steel low profile platform • Bench or wall mountable display pod • Mains or ba...

KEWTECH

Calibration checkbox is used for evaluating the overall accuracy of various testers during the time period between official calibrations by a certified laboratory. The FC2000 includes three continuity test points, three insulation test points and two loop ...

HANNA INSTRUMENTS

The HI-98303 is a rugged and reliable pocket-sized tester that offers quick and accurate readings of conductivity and ideal for testing in the field and the laboratory. • Manual 1 point calibration • Large and easy to read LCD display • Graphite sensor for...

MEGGER

The Megger MPU690 proving unit provides a portable battery operated voltage source that can verify the correct functioning of a two pole voltage detectors. • 5 stepped nominal output voltages (50, 100, 230, 400, 690V) • Automatic power on when probes inser...

VELLEMAN INSTRUMENTS

A bench power supply with dual LCD display suitable for use in workshops or laboratories. • LCD display for voltage and current • Current limiting protection • Fuse-protected • Insulated plugs • IEC1010 output connectors • White-grey colour • UK mains plug...

TENMA

• Measures and stores temperature & humidity readings • Memory for 16000 temperature & 16000 humidity readings • Selectable measuring cycle • Status indication via red/ yellow & green LED • USB interface for set up & data download • User programmable alar...

HIRSCHMANN TEST AND MEASUREMENT

Safety clamp-type test probe with rigid hook to ensure secure clamping of eyes, pins, wires and boards. 4 mm brass socket connection.Connects with safety measuring leads. • 4 mm safety system • Clamp-type test probe • AC/DC 1000 V rated voltage (1) • CAT I...

MEGGER

The DCM340 is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of AC or DC electrical systems and equipment. • 3½ digit, 4000 count display with backlight • High resolution digital bargraph • Peak, mi...

SALTER

• 150mmØ dial • 15% zero adjustment • ABS plastic case with shatterproof PC cover • Corrosion resistant • Low friction bearings provide maximum sensitivity • Supplied with top and bottom hook

KEWTECH

PAT testing log book designed to be used with manual Pat testers for multiple site use. • Manually logs your test results - provides a professional results sheet for your customer • Duplicate sheets - enable you to keep a second record • A4 pad of 50

ATP INSTRUMENTATION

This pocket size and easy-to-use infrared thermometer is ideal for precise non-contact measurement of surface temperatures. It is suitable for monitoring appliances, heating, ventilation & air conditioning systems, food preparation and storage temperatures...

PEAK

The DCA75 Advanced semiconductor analyser combines ease-of-use with amazing features and can automatically identify a huge range of semiconductors, identify pinouts and measure detailed parameters • Features a graphics display, USB port, PC Software and an...

ATP INSTRUMENTATION

• High temperature IR thermometer with laser sighting • Temperature readout in °C or °F • 30:1 Distance to spot ratio • Emissivity: 0.1 to 1 (adjustable) • 26mm LCD display with backlight • Data hold and max/ min memory functions • Auto power off after 20...

KEWTECH

Testing accessory kit includes all those items that make your testing easier, safer, faster and more accurate. It will also turn your tester into a PAT tester and combined with our new KT65DL it allows for a PAT testing results saving and download that pro...

KEWTECH

Electrical installation certificates made for use with Kewtech's TC5 and TC6 certification books. • For new electrical installations for supplies up to 100A • Use with the test schedules which are TC5 for up to 12 ways or TC6 for greater than 12 ways • Com...

LASCAR

This standalone data logger measures and stores up to 16,378 temperature readings over a -35 to +80°C (-31 to +176°F) range. The user can easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC's US...