Power Tool Accessories

TREND

Twin flute straight router cutter bit with TCT tip for use on abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. • High-quality tungsten carbide tip for long-lasting sharpness • 1/4" Shank for compatibility with a wide range o...

LINEAR TOOLS

Double-ended, high-speed, steel drill bits with a right-handed cutting action, manufactured to BS 328:1972. • 60° inclusive countersink angle • 118° standard point

EVOLUTION

• Evolution 210mm 20 tooth multi-material cutting blade • Designed to cut mild steel, aluminium, plastic, wood and even wood with embedded nails • Designed to deliver maximum performance by using the highest grade carbide, hardened blade bodies & ultra hi...

TREND

CRAFT <bold>PRO</bold> Range twin flute straight router cutter bits with TCT tip for use on abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. • Two flutes give a clean finish to cut edges • Solid Carbide inserts rather than ...

HILKA TOOLS

SDS Core drills ideal for plumbers and electricians for drilling holes in brick, concrete and block. • Tungsten carbide tipped • Comes complete with arbor and guide drill

LINEAR TOOLS

A high quality, high speed drill bit manufactured to DIN 338 and BS 328 standards. The drill bit has a longer working length than standard drills making them ideal for use in hard-to-reach areas. • HSS fully ground • 118° Standard point

TREND

Twin flute straight router cutter bit with TCT tip for use on abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. • High-quality tungsten carbide tip for long-lasting sharpness • 1/4" Shank for compatibility with a wide range o...

BOA

High quality blade that uses welded tip technology to give longer life cycle and better performance. • Tungsten carbide girt edge • Tough and very smooth • Cuts metal, wood, ply, copper, and nails

BOSCH - PROFESSIONAL / BLUE

• Scraper blade for Bosch Multi-tool cutter • Models: PMF180E, GOP10.8VLI

WERA

BiTorsion bits for Phillips screws with elastic Torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼” hexagon, su...

WERA

Wera 875/1 Z general purpose screwdriver bit, for TRI-WING® screws. Wera tough-absorbing (Z) bits prevent premature wear, making them suitable for use with hard materials. Suitable for both manual and power tool use (non-impact). • Tough-absorbing (Z) bit ...

BOSCH - PROFESSIONAL / BLUE

• Diamond drilling is the most effective method of creating holes in walls • Professional laser welded • Ideal for drilling in to many types of material such as concrete, brick/blockwork, asphalt etc

WERA

BiTorsion bits for Pozidriv screws with elastic Torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life. Tough viscous ...

BOA

• Used in conjunction with boa water cooling system which is included with each drill bit • Cuts through glass, marble, granite, slate and class 5 porcelain tile • Cuts up to 60 holes in even the most difficult materials • Automatically dispense debries •...

SNAPPY

• Heat treated steel countersink with drill bit • Adjustable for different lengths of screws • Can produce counterbored hole for wood plugs • Drill bit produces pilot holes only • ¼" Hex shank • Drill Diameter: 2.5mm (3/32") • Countersink Diameter: 9.5mm ...

BOSCH - PROFESSIONAL / BLUE

Cobalt drill bits are for drilling in to extra hard materials and drilling at high temperatures, the split tip enables bits to bite the work piece quickly reducing the need for centre mark. Ideal for drilling into heat and acid proof steel, cast iron, bron...

SNAPPY

• Heat treated steel countersink with drill bit • Adjustable for different lengths of screws • Can produce counterbored hole for wood plugs • Drill bit produces pilot holes only • ¼" Hex shank • Drill Diameter: 3.5mm (9/64") • Countersink Diameter: 12.7mm...

BOSCH - PROFESSIONAL / BLUE

Adaptor for use with Dry diamond core drills

BOSCH - PROFESSIONAL / BLUE

• Suitable for sanding all metals, woods and plastics • Aluminium oxide abrasive • Hook and Loop backed delta and multi-sander pads • Pad Size, 2-Part Detail: 151mm x 102mm

LINEAR TOOLS

A high quality, high speed drill bit manufactured to DIN 338 and BS 328 standards. The drill bit has a longer working length than standard drills making them ideal for use in hard-to-reach areas. • HSS fully ground • 118° Standard point

LINEAR TOOLS

Double-ended, high-speed, steel drill bits with a right-handed cutting action, manufactured to BS 328:1972. • 60° inclusive countersink angle • 118° standard point

LINEAR TOOLS

• General purpose use • Fully ground flute • 118° Point • Right hand spiral • Industrial quality black finish

WERA

Wera Bit-Check 6 PZ Impaktor 1, for use in modern impact drivers. Wera's Impaktor bits maximise utilisation of material properties. Using a very special geometry, the bits are designed to meet extreme working demands via the unique TriTorsion system. TriTo...

WERA

Wera 851/1 BDC BiTorsion Diamond Coated Long Service Life bit, for Phillips screws. Often bits break as they can't handle the peak stress put upon them, the tip breaks and damage is also often caused to the screw head. Wera designed the BiTorsion system to...

BOSCH - PROFESSIONAL / BLUE

• High-quality chisels from the world's largest chisel manufacturer • Includes flat chisel with integrated breakout teeth geometry • Angled tile chisel for optimum performance • Length: 250mm • Contents: • 1x Pointed chisel • 1x Flat chisel • 1x Angled ti...