Power Tool Accessories

TREND

Guide bush that guides a router when using a jig and template. • Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10, T11 and some other routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE sub-base

BOSCH - PROFESSIONAL / BLUE

Traditional Bi-metal hole saw to be used with Bosch traditional arbors. Ideal for fast clean cut into most materials such as wood, metal or plastic. • Suitable for all leading brands of drills

BOSCH - PROFESSIONAL / BLUE

• Suitable for sanding all metals, woods and plastics • Aluminium oxide abrasive • Supplied in packs of 3

LINEAR TOOLS

• For use on most ferrous and non ferrous materials

BAHCO

A high quality, bi-metal hole saw with the ability to cut through virtually any machinable material including cast iron, stainless steel, brass, bronze, aluminium, plastics and wood. • Fit most power drills, both stationary and portable • Knockout holes al...

WERA

Wera 840/4 Z general purpose screwdriver bit, for hexagon socket screws with protruding pin. Wera's Hex-Plus profile prevents the rounding out of Hexagon socket screws, whilst allowing 20% more torque to be transferred. Tough-absorbing (Z) bits prevent pre...

LINEAR TOOLS

A high quality, high speed drill bit manufactured to DIN 338 and BS 328 standards. The drill bit has a longer working length than standard drills making them ideal for use in hard-to-reach areas. • HSS fully ground • 118° Standard point

LINEAR TOOLS

For use on most ferrous and non ferrous materials. • Boxed set of 90˚ Zero Flute: DIN 335C Countersinks • For use on most ferrous and non ferrous materials • Range: 2mm - 20mm • Supplied in a fitted plastic case

LINEAR TOOLS

• Require no pilot drilling • Bur free drilling

LINEAR TOOLS

• High Speed Steel Jobber drills • Manufactured to DIN 338/BS 328 • Ground flute, industrial quality • Black finish • Supplied in metal indexing boxes • Self lifting holders make the bits very accessible yet secure when the boxes are closed

DURATOOL

• HSS - Ground to DIN338 • Black oxide M1 material • 118° standard point • For metal, wood and plastic • Duratool products are rated 4.1 out of 5 stars • 12 month limited warranty *view Terms & Conditions for details

WERA

Wera 868/1 IMP DC Impaktor Diamond Coated Long Service Life Square-Plus bit, for use in modern impact drivers. Wera's Impaktor bits maximise utilisation of material properties. Using a very special geometry, the bits are designed to meet extreme working de...

MAKITA

Ideal disc for heavy stock removal under high pressure and heat, for use on stainless steel, cast iron, aluminium, non-ferrous metals and alloys. It is also suitable for quick removal of wood. • Grinds as efficient as a bonded abrasive disc • Made from zir...

LINEAR TOOLS

Fully ground HSS drill bit with an extra long working length. • Right hand helix • Wide flutes

WIHA

A ¼" hexagonal drive bit suitable for use with both hand and power tools.

BOSCH - PROFESSIONAL / BLUE

• Jigsaw blades with a progressive tooth design for faster and smoother cuts • New plunge tip for easier plunge cuts • For Bosch, Makita, Dewalt and Freud jigsaws • Sold in packs of 5 • 1.5-10mm - Metal plate, pipes/profiles inc. aluminium -30mm

BAHCO

A high quality, bi-metal hole saw with the ability to cut through virtually any machinable material including cast iron, stainless steel, brass, bronze, aluminium, plastics and wood. • Fit most power drills, both stationary and portable • Knockout holes al...

WERA

Wera 840/4 Z general purpose screwdriver bit, for hexagon socket screws with protruding pin. Wera's Hex-Plus profile prevents the rounding out of Hexagon socket screws, whilst allowing 20% more torque to be transferred. Tough-absorbing (Z) bits prevent pre...

HILKA TOOLS

Versatile 20 piece sanding kit, ideal for use with a multitude of rotary tools including die grinders, air powered drills and conventional electric drills and pillar drills. • Supplied on 4 drums: ½",⅜", 1" and 1½" • Two sets of abrasive discs for each dru...

BOSCH - PROFESSIONAL / BLUE

• Suitable for sanding all metals, woods and plastics • Aluminium oxide abrasive • Supplied in packs of 3

BOSCH - PROFESSIONAL / BLUE

High quality drill bit to drill in to all types of tiles including ceramic, porcelain, marble and even granite. • No requirement for water cooling • Heat treated shank • Specially designed diamond cut tip • Extra sharp pointed tip eliminates travelling on ...

WERA

Wera 855/1 BDC BiTorsion Diamond Coated Long Service Life bit, for Pozidriv screws. Often bits break as they can't handle the peak stress put upon them, the tip breaks and damage is also often caused to the screw head. Wera designed the BiTorsion system to...

TREND

Twin flute straight router cutter bit with TCT tip for use on abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. • High-quality tungsten carbide tip for long-lasting sharpness • 1/4" Shank for compatibility with a wide range o...

BOSCH - PROFESSIONAL / BLUE

Traditional Bi-metal hole saw to be used with Bosch traditional arbors. Ideal for fast clean cut into most materials such as wood, metal or plastic. • Suitable for all leading brands of drills

UNBRANDED

High speed steel (HSS) is a form of tool steel. HSS bits are hard, and much more resistant to heat than high carbon steel. They can be used to drill metal, hardwood, and most other materials at greater cutting speeds than carbon steel bits, and have largel...