Signal Processing & Management

ADAM HALL HARDWARE

19" 12U Rack stand ideal for floor or desk top mounting of rackable equipment. • 65° Mounting frame angle for easy use of equipment and visability of display screens • Pre-drilled and tapped for M5 screws • 24 Screws included

IMG STAGE LINE

The microphone splitter MPS-1 allows you to distribute a microphone signal to two audio units (e. g. main mixer and monitor mixer). Due to the DC separation of the input and the ISO OUT, hum loops are prevented. • Galvanically isolated output with ground l...

ADAM HALL HARDWARE

19" 6U Rack stand ideal for floor or desk top mounting of rackable equipment. • 65° Mounting frame angle for easy use of equipment and visability of display screens • Pre-drilled and tapped for M5 screws • 12 Screws included

SAMSON

The MCD2 Pro Stereo Passive PC Direct Box is the ideal solution for connecting unbalanced line level signals from laptops, CD/MP3 players and DJ mixers to professional balanced equipment. Durable, road-ready construction and dual Mu-metal shielded transfor...

PRO SIGNAL

• Supports HDMI 2.0, HDCP 2.2, 4K @ 60Hz 4:4:4 18Gbps (6Gbps per colour), 3D, HDR • Extract 4K HDMI audio and outputs to a multi-channel digital or analogue audio signal • Route HDMI audio simultaneously via S/PDIF and 3.5mm stereo audio outputs • Support...

ART

The T8 is a quality totally passive audio interface that uses eight high performance low distortion transformers to totally separate input and output signal grounds,thereby isolating two systems and reducing hum and ground-loop noise. • 8 Channels with XLR...

CITRONIC

Digital speaker management systems which incorporate crossovers, EQ and limiters for multi-amplifier and speaker setups. These units enable the sound system designer to accurately control the inputs for each power amplifier, providing an ideal matched outp...

ART

The P48 48-point balanced patchbay is the best solution for organising cables while optimising connectivity in any studio or live PA rack. Designed for maximum convenience, each pair of TRS 1/4-inch balanced I/O can be configured for normal or half-normal ...

PROCEPTION

Compact and easy to install digital to analogue audio converter, ideal for home and professional audio applications. • Features 32/44.1/48/96KHz sampling rates • Connections: Toslink digital in, RCA coax in, 2x L/R RCA coax out • Dimensions (HxWxD): 26x41x...

ZOOM

This vocal processor is ideal for recording and live performance. After enhancing volume and clarity, it can correct pitch or add harmony and reverb. It features functions that vocalists need most inside a compact unit that is easy to carry around. You can...

GLENSOUND

The Signature ADDA1 is a broadcast specification, bi-directional analog/digital audio converter. Analog inputs and outputs are available separately on balanced XLR connections, or unbalanced RCA phono connections. The digital inputs and outputs are availab...

GLENSOUND

The Glensound AoIP4I is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications. It is designed to easily and quickly interface existing analog equipment to a Dante® / AES67 network audio system. Being powe...

TASCAM

The ML-4D/OUT is an exquisite analog output unit that converts 4x Dante input signals into 4x line output signals. In addition, it also supports 4 channel Dante output, making it possible to use virtually any audio source within the established Dante netwo...

GLENSOUND

The DARK16AO is a 19” 1RU subrack that provides 16x high quality analog audio outputs from a Dante/AES67 AoIP network. These audio outputs are balanced line level signals and for ease of installation are presented on rear panel XLR sockets. Being designed ...

GLENSOUND

The Glensound AoIP4O is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications. It is designed to easily and quickly interface existing analog equipment to a Dante® / AES67 network audio system. Being powe...

ART

Ideal for any live PA rack, studio rack or fixed installation where easy access to XLR inputs are required, the P16 brings all rear-mounted XLR inputs from various devices to a convenient single space rackmountable location. The P16 saves wear and tear on ...

HAMA

The converter can be used universally and has a scart input and a digital HDMI output on the other end. It is used to convert an analogue image and audio transmission into a digital signal. It allows you to connect playback devices that only have a scart i...

SOUNDSATION

The DI-Box Soundsation PDX-100 converts high impedance audio signal from instruments or line outputs to a low impedance balanced output to be fed directly into a mixing console or amplifier input. Low impedance is capable of longer leads runs via XLR conne...

AV:LINK

Simple AV adaptor that converts a legacy Scart connection to a high definition HDMI output complete with audio. The plug & play adaptor features switchable output for 720p/1080p displays and is USB powered for easy setup. • Ideal for connecting VCRs, DVD p...

AV:LINK

Plug and play AV adaptor that converts a high definition HDMI input to a Scart signal, ideal for older TVs without an HDMI connection. The adaptor features switchable output for PAL & NTSC displays and is USB powered for easy setup. • Ideal for connecting ...

SOUNDSATION

ADX-800 LINK is a DI box that converts up to 2x unbalanced audio signals into balanced signals with XLR connections. This allows not only to attenuate the interferences that normally the unbalanced leads collect in the medium-long distances, but also acts ...

PROEL

D10P is a passive direct box with transformer and does not require any external power such as phantom power or batteries to work. The advantage of a transformer is the possibility to avoid any electrical connection between the sound source and the mixer. T...

QTX

The 900.596UK from QTX is a 3 Way Crossover rated at 8 Ohm and 400W. Ensures a balanced separation of the high and low frequencies. • High quality components • Excellent sound reproduction • Impedance: 8 Ohm • Damping: 6dB/Oct. • High Frequency: 5kHz to 20...

ZOOM

Introducing the B2 FOUR Amp and Effects Emulator, powered with Zoom’s Multi-Layer IR technology and 6 iconic DI models. It's never been easier to craft the perfect low-end tone. • Build patches from 104 effects, including models of famous boutique effects ...

QTX

• Crossover frequency 120Hz • Damping factor of 12dB/oct • Connections by solder terminals • Impedance: 4 Ohms • Power: 600W • Power rms: 320W • UK mains plug (type G), as used in the UK, IRL, Cyprus, Saudi Arabia, Malta and many others.