Electronic Modules

SPARKFUN ELECTRONICS

Unique, high fidelity polyphonic audio player that supports up to 2048 uncompressed 16-bit stereo WAV files at CD quality (44.1kHz). • Play and mix up to 14 stereo tracks simultaneously and independently • Control tracks via 16 programmable trigger inputs,...

MFA

Module has a variety of uses which include the speed control of motors up to 3A max. current consumption. Pulse width modulation provides proportional output control and torque maintenance. Output control is achieved by varying the output pulse. • Compact ...

ST HELENS HOME AND GARDEN

The GH6401 from St. Helens Home & Garden provides all the parts you need to begin clock-making or repair a damaged timepiece. Comprising five different hand sets, the kit provides unmatched versatility for complementing your clocks design and aesthetic. Th...

WHADDA

The Mini USB Interface Board is a compact USB controlled I/O board that allows you to add a USB interface to existing equipment or use your PC to connect with other devices. The board provides 15x inputs/outputs; including analogue, digital and PWM connect...

CEBEK

Light sensitive module which activates a relay when the light level drops below an adjustable level. Reverse polarity protected. LED operating indicator. • Probe supplied • Operating voltage: 12V • Current consumption: 50mA • Maximum relay load: 5A • Detec...

KEMO ELECTRONIC

The infrared spotlight allows CCD cameras to operate in complete darkness. The human eye is not senstive to infrared but CCD cameras are, making infrared illumination perfect for inconspicuous observation of entrances, drives etc. Other applications inclu...

KEMO ELECTRONIC

This power control module can control resistive inductive loads such as motors, heaters (if they are phase controllable). • Operating voltage: 110-240Vdc • Loading capacity: 230Vac @4000VA • Mximum load: 18A (when mounted on heatsink) • Regulation: phase c...

CEBEK

A 2 channel receiver module with dual relay output. The module is designed to receive and decode signals sent by two remote control transmitters from a distance of up to 30 metres, allowing connection and disconnection of both outputs. This standard receiv...

CEBEK

A mono amplifier which has an output impedance of 4-8Ω. • Power rating: 5W • Power supply: 12Vdc • Current consumption: 250mA • Input signal: 100mV • Frequency: 30Hz-18kHz • Dimensions (HxWxD): 50x40x20mm

CEBEK

A 1 channel receiver module with single relay output. The module is designed to receive and decode signals sent by two remote control transmitters from a distance of up to 30 metres, allowing connection and disconnection of both outputs. This standard rece...

CEBEK

This module interfaces with the outputs with MOSFET transistors. Through optocouplers it will electrically insulate control signals of each input, output signal. When you inject on any input a signal between 3 and 24Vdc, the corresponding output will be ac...

CEBEK

A power supply for use with a CEBEK model kits. It is an open frame design with the transformer inserted on the PCB and DIN-rail format. • Rating: 12V, 4.5A

CEBEK

A 230Vac light regulator module, which enables you to control the luminous intensity of lamps or other resistive loads. This module will not accept inductive loads. • Load output (min/ max): 50W/ 4000W • Dimensions: 82x30x65mm

CEBEK

5W RMS mono power stage module with two inputs: preamplifier and power stage. The first mono input will preamplify the input signal and input it on the power stage. The power stage input will amplify directly, independent of the preamplifier. The modules i...

CEBEK

A stereo amplifier with an output impedance of 4-8Ω and requires a 12V dc power supply. It has an input impedance of 100kΩ. • 2x 5W amplifier • Current consumption: 500mA • Input signal: 100mV • Frequency response: 30Hz to 18kHz • Dimensions (WxHxD): 95x25...

CEBEK

A mono amplifier which has an output impedance of 4-8Ω. • Power rating: 15W • Power supply: 24Vdc • Current consumption: 500mA • Input signal: 300mV • Frequency: 20Hz-18kHz • Dimensions (HxWxD): 80x65x45mm

CEBEK

Through optocouplers this module will electrically insulate control signals of each input, output signal. When you inject on any input a signal between 3 and 24Vdc, the corresponding output will be activated and it is maintained till the input voltage decr...

KEMO ELECTRONIC

This preamplifier is ideal for microphones. This mini module is simply connected between a power amplifier and a weak signal source such as a microphone. • Operating voltage: 9-24Vdc • Frequency range: 20-20000Hz ±3dB • Input voltage: 2-50mV • Output volta...

CEBEK

This module interfaces with the outputs with MOSFET transistors. Through optocouplers it will electrically insulate control signals of each input, output signal. When you inject on any input a signal between 3 and 24Vdc, the corresponding output will be ac...

UNBRANDED

A simple, low cost, versatile timer suitable for security systems and many other applications where a reliable modular timer is required. In all cases, the timer will start when an input signal is applied. This signal may have a positive +5V-±15V or a nega...

CEBEK

A 4 Digit USB Timer interface which is designed to be connected to a USB port on your computer, allowing you to remotely control the timer. • LED Display Size: 2.5" • Power: 12Vdc - 160mA • Relay: 3A, 250V • Power Consumption: 160mA • Inputs: Start/Stop, P...

CEBEK

• Relays: 4 Switched type 40.31s, 3A 250Vac • Power Supply: 12 Vdc - 230mA for control • Inputs: Terminals relay activation to manual mode • Control Chip: STM8S105K • USB Chip: FT232RL • Power and relay indication LEDs • USB 1.1, USB 2.0 and USB 3.0 full ...

CEBEK

A 4 Digit USB Timer interface which is designed to be connected to a USB port on your computer, allowing you to remotely control the timer. • LED Display Size: 4" • Power: 12Vdc - 160mA • Relay: 3A, 250V • Power Consumption: 180mA • Inputs: Start/Stop, Pre...

CEBEK

A single input relay with a single independent double pole output • Reverse polarity protection • TTL or CMOS signals control • LED Operation indicator • Voltage: 24Vdc • Voltage Min: 3Vdc • Voltage Max: 24Vdc • Entry Current Min: 10mA • Consumption Max: 3...

CEBEK

This USB interface controller is an electronic circuit designed to be connected to a USB port on a computer, allowing you to remotely control the output voltage to regulate a 230Vac lamp. • Inputs for manual control of regulation • Out: An alternating curr...