Raspberry Pi Other Accessories

PIMORONI

The Pimoroni Breakout Garden Mini is the perfect solution for prototyping smaller projects without the need for complicated wiring, soldering or breadboards. Simply pop a Pimoroni breakout into one of the slots and you're ready to start coding and creating...

PIMORONI

The Pimoroni Breakout Garden is the perfect solution for prototyping projects without the need for complicated wiring, soldering or breadboards. Simply pop a Pimoroni breakout into one of the slots and you're ready to start coding and creating. The Breakou...

MULTICOMP PRO

ASM-1900181-21 is a Raspberry Pi 5 heat-sink. • Aluminium 6063-T5 and thermal transfer pads materials • Black anodized finish

THE PI HUT

A simple blower fan for the Raspberry Pi 5, blower fans send air out to the side instead of downwards like traditional fans. The fan has the same footprint and dimensions to be used as a replacement for the official active cooler fan. • 30mm Fan, 5V/0.2A •...

RASPBERRY-PI

The SC1677 is a single port 30W Power over Ethernet (PoE+) injector that enables a PoE supply to any PoE enabled Raspberry Pi board. The injector supports Gigabit network passthrough speeds (10/100/1000Mb/s). • Powers Raspberry Pi PoE and PoE+ devices (HAT...

RASPBERRY-PI

SC1752 is a Raspberry Pi cooler for Raspberry Pi Compute module 5. This is a passive heatsink that helps Compute Module 5 dissipate heat, improving CPU performance and protects it from mechanical damage. Thermally conductive silicone on the underside of th...

WAVESHARE

The Waveshare 29437 is a simple and effective fan that is made specifically for the Raspberry Pi Compute Module 5. The fan is powered by a 5V supply, connects via a 4-wire PWM header and includes thermal tapes for efficient heat dissipation. • Compact, low...

MULTICOMP PRO

ASM-1900182-01 is a Raspberry Pi 5 fan. • 4 pin connector • 5VDC/4.5V to 5.5V rated voltage • 0.25A current rating • 7500RPM ±10% speed • 1.06CFM airflow, 28dba±10% noise level • 80mm wire length, black colour • 30mm x 30mm x 7 mm (LxWxH) size

SEEED STUDIO

This Grove extension board offers you the opportunity to extend the capabilities of the ReSpeaker Core modular voice interface by allowing up to 10 ports for connection of Grove sensors and actuators. • Ports: 3x digital, 4x analogue, 2x I2C and 1x UART • ...

ARGON 40

Designed specifically for the Raspberry Pi 5, the Argon THRML radiator cooler delivers extreme cooling performance. The tower-style radiator is equipped with copper heat pipes and a 60mm PWM fan for rapid cooling, making it perfect for demanding applicatio...

ARGON 40

The Argon THRML is an active cooling solution designed specifically for the Raspberry Pi 5, allowing you to maintain full performance during demanding applications. The stylish design incorporates both a large aluminium heatsink and a PWM fan that work tog...

ARGON 40

The Argon THRML is an active cooling solution designed specifically for the Raspberry Pi 5, allowing you to maintain full performance during demanding applications. The stylish design incorporates both a large aluminium heatsink and a PWM fan that work tog...

ARGON 40

Designed specifically for the Raspberry Pi 5, the Argon THRML radiator cooler delivers extreme cooling performance. The tower-style radiator is equipped with copper heat pipes and a 60mm PWM fan for rapid cooling, making it perfect for demanding applicatio...

PIMORONI

The LiPo SHIM from Pimoroni provides a convenient solution for powering your Pico projects from an external LiPo or Li-ion battery pack. The attached battery (not included) can be easily recharged by providing power to the Pico's USB port.

MONKMAKES

A combo pack that contains a squid RGB LED and two non-latching button switches,complete with Leaf GPIO identifier. • Chunky pushbuttons with non-latching momentary action • Built-in resistors protect your Pi if any of the squids are accidently connected a...

MONKMAKES

A chunky pushbutton with trailing leads and built-in resistor that can be connected directly to the GPIO pins of a Raspberry Pi for additional functionality. • Chunky pushbutton with non-latching momentary action • Built-in resistor protects your Pi if the...

CYNTECH COMPONENTS

This kit enables you to convert your Raspberry Pi into a word clock, including mounting for the Pi inside to give a neat appearance. • Compatible with Raspberry Pi Zero, Raspberry Pi 3, Raspberry Pi 2 and Raspberry Pi B+ • Can hold an RGB LED panel to disp...

PIMORONI

Build yourself an authentic arcade machine, perfect for recreating that retro gaming experience! The new Picade features a redesigned cabinet layout and updated components, complete with high resolution 8" IPS display and powerful speaker. All it needs is ...

MONKMAKES

A simple, cost effective kit that will help you learn simple electronics and coding with the Raspberry Pi Pico. This kit is supplied with components to build 10 exciting projects including a thermometer and a lie detector. The full guide for the kit is ava...

THE PI HUT

Stylish and cost-effective protective sleeve for the Raspberry Pi 400. • Durable stitched material with hook & loop strap to keep the Pi secure • Protects against dirt, dust and scratches

MONKMAKES

The Proto board allows you to easily create soldered prototypes with the Raspberry Pi Pico. The board is modelled on a 400-point breadboard design with additional rows for through-hole components. • Pico GPIO pin labels • 2M5 Mounting holes

PIMORONI

The PIM707 from Pimoroni is a sophisticated breakout built around the AS7343. The AS7343 is a mult-purpose spectral sensor that can detect fourteen distinct channels of light (from 380nm to 1000nm). The sensor is optimised for reflective, transmissive and ...

CYTRON

The Maker Pi RP2040 is a comprehensive robot controller board with embedded RP2040 microcontroller; features a 2 channel DC motor driver, 4x servo motor ports and 7x Grove I/O connectors for external sensors and components. • Powered by the RP2040 chip • A...