Add-on Boards / Modules

SEEED STUDIO

Grove - Rotary Angle Sensor, whose Grove connector is moved to the back compared to its original version, this potentiometer twig produces analogue output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angul...

TECHNOLOGY WILL SAVE US

Tech and crafts come together to help you unleash your creativity. With 12 projects to make, simply add a BBC Micro:bit (not supplied) and you’ll be able to create things from musical instruments out of fruit to a football game. This pack includes everyth...

CEBEK

• Expansion board for use with the ATMega328 • 2 Analogue inputs of 5/ 10Vdc • 2 Digital inputs of 5/ 24Vdc • Input with 10kΩ potentiometer • Includes an L293 driver output • RX-TX and I2C outputs • Power supply: 12/ 24Vcc (not included)

CEBEK

• Expansion board for use with the Arduino Uno • 2 Analogue inputs of 5/ 10Vdc • 2 Digital inputs of 5/ 24Vdc • Input with 10kΩ potentiometer • 2 NPN outputs @300mA • RX-TX and I2C outputs • Power supply: 12/ 24Vcc (not included)

KITRONIK

This unique circular LED board for the micro:bit features 24 individually addressable, full colour Zip™ LEDs which are capable of amazing and colourful effects that will add some colour to your projects! • Zip™ LEDs are compatible with any WS2812B driver c...

SEEED STUDIO

Grove - Switch(P) is a mini SPDT slide, great for ON/OFF situations. • Panel mount • Input voltage is 3.3V / 5V • Dimension is 20mm x 20mm x 9mm

4TRONIX

The Light Sensor Gizmo provides an easy way to connect an Analog input which varies with the brightness of the light shone on it , and can be read on the Crumble or micro:bit. Simply use one of the connection cables to connect from the Playground to the Gi...

4TRONIX

The Touch Gizmo provides an easy way to make an input that is Active (High) when touched, or inactive (Low) when not touched. Simply use one of the connection cables to connect from the Playground to the Gizmo. • Works with Crumble and micro:bit Playground...

SPARKFUN ELECTRONICS

Arduino shield based around the TLC5940 IC which allows you to generate up to 16 PWM signals from the Arduino; ideal for use in LED displays, LED signboards, display backlighting, servo control or any other project where a large number of PWM drivers are r...

CEBEK

• Expansion board for use with the ATMega328 • 4 Analogue inputs of 5/ 10Vdc • 2 Digital inputs of 5/ 24Vdc • Input with 10kΩ potentiometer • 4 NPN outputs @300mA • RX-TX and I2C outputs • Power supply: 12/ 24Vcc (not included)

4TRONIX

The Servo Gizmo makes it easy to connect and control a servo, setting its position from -90° to +90° easily using the Crumble's or micro:bit's built in Servo commands. • Works with Crumble and micro:bit Playgrounds

4TRONIX

The Dial Gizmo provides an easy way to connect an Analog input dial which can be read on the Crumble or micro:bit. Simply use one of the connection cables to connect from the Playground to the Gizmo. • Works with Crumble and micro:bit Playgrounds • On the ...

SEEED STUDIO

This starter shield is a perfect introduction to the world of Makerspace, teaching you some basic skills like soldering techniques, basic electronic circuit principles and programming skills. It contains the most commonly used components to get you started...

KITRONIK

• Tipper Truck add-on for the MOVE mini microbit robot

KITRONIK

• Bulldozer add-on for the MOVE mini microbit robot

PROTOPALETTE

Every project needs a starting point and ProtoPalette Start is designed to be just that. Built to last and priced within reach of just about everyone, the ProtoPalette Start is your own personal launchpad for whatever kinds of electronics or programming in...

KITRONIK

This fun kit is designed to get children (and adults!) learning about technology, engineering and programming. Once it's built, no additional boards are required, just power it up, drop some code in and it's ready to go! • Blue version of MeArm robot Ardui...

WHADDA

Dedicated data logging shield designed especially for Arduino projects. The WPSH202 is capable of interfacing with FAT16 and FAT32 formatted SD cards. A built-in real time clock keeps the time going even when the Arduino is switched off with the included b...

WHADDA

A simple 5V relay module that is compatible with Arduino projects. • Rating: 10A @250V AC, 10A @30V DC (non inductive) • Contacts: C, NO, NC • Connections: GND, +5V DC, control input (5V - 12V) • Dimensions (HxWxD): 18x40x27mm

DFROBOT

SEN0204 is a gravity: non-contact digital liquid level sensor board for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection. No ...

WHADDA

Designed to be integrated into Arduino projects, the WPI405 is a compact module for reading & writing to RFID cards. • Allows you to read & write RFID cards • Operating voltage: 3.3V DC • Working current: 13mA to 26mA (30mA peak) • Frequency: 13.56MHz • In...

KITRONIK

This Inventor's Kit for the micro:bit is the perfect way to get started with programming and hardware interaction with the micro:bit. The experiments included are: say 'Hello' to the micro:bit, using an LDR and analogue inputs, dimming an LED using a poten...

SEEED STUDIO

Grove - Gas Sensor(MQ9) module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke and so on. Measurements can be taken as soon as possible based on its fast response time. Also, the sen...

SEEED STUDIO

Grove - SPDT relay is a high-quality single pole double throw relay(SPDT). The Relay consists of a coil, 1 common terminal, 1 normally closed(NC) terminal and one normally open(NO) terminal. Suitable for switching, electrical heater, ventilator, air condit...

SEEED STUDIO

Grove - Red LED is a general purpose LED module in Grove form factor. The ingenious PCB design enables user to bend the LED to any position you want, which makes it easy to use it standalone, horizontal or Panel Mount. • Grove interface compatible • Plug a...