Single Board Computers, Microcontrollers & Add-Ons

DFROBOT

Unique sensor that can be used to detect fire or other wavelengths at 760nm to 1100nm light. Applications include fire-fighting robots; the sensor can be used to find a fire source. • Probe angle: 60° • Temperature range: -25°C to +85°C • Detection range: ...

CYPRESS - INFINEON TECHNOLOGIES

The CY8CKIT-024 is a CapSense proximity shield kit which is an Arduino compatible evaluation platform for CapSense based proximity sensing solutions. The CY8CKIT-024 enables to evaluate proximity sensing capabilities of Cypress's industry leading CapSense ...

SPARKFUN ELECTRONICS

The MicroView USB programmer is designed not only for programming the MicroView display module but using it to interface with your computer and other USB devices. • Designed to make programming and prototyping with the MicroView quick and easy • Programmer...

4TRONIX

Multifunction handheld micro:bit controller; suitable for various applications such as remote control of another micro:bit (ideal for buggies and robotics projects) or even as a standalone portable games console. • 6 Multi-colour RGB LEDs (neopixel compati...

4TRONIX

A magical cube of RGB LEDs with endless possibilities! The 4x4x4 Cube:Bit kit is made from four layers with neopixel LEDs on each side to give an all-round lighting effect, ideal for learning about 2D/3D co-ordinates and creating stunning visual effects. •...

DFROBOT

Soldering and wiring often become a problem when a bridged connection fails or components break - increasing time and cost for projects. Thanks to the simple design layout the IO Expansion shield can make robotics prototyping easier, faster and more afford...

DFROBOT

Say goodbye to messy cables and clueless plugging/unplugging! This  Sensor Shield  is a powerful expansion shield  for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 MicroSD slot and shield headers for most Arduino shields on the marke...

SEEED STUDIO

Grove - Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its colour cantered around 940nm. We can use the e...

ARDUINO

The MKR Proto Shield is a prototyping shield designed for the Arduino MKR form factor boards. It connects onto your MKR board using the included male and female headers. The shield offers a duplicate breakout for each pin on the board along with many solde...

DFROBOT

This is a simple sound making module that you can use High/Low to drive it. Simply change the frequency at which it buzzes, you can hear different sounds. It is widely used in many applications such as simple alarms and refrigerators but it is ideal for in...

SPARKFUN ELECTRONICS

Easily add MIDI sound to your next Arduino project with this shield, based around the VS1053 MP3 & MIDI codec IC which is wired in MIDI mode. • The VS1053 contains two tonebanks that include a variety of piano, woodwinds, brass, synth, SFX and percussion s...

ARDUINO

TSX00002 is a- MKR Proto Large Shield. It is a prototyping shield designed for use with the Arduino MKR form factor boards. It connects onto your MKR board using the included male and female headers. The shield offers a duplicate breakout for each pin on t...

DFROBOT

DFR0023 is a Gravity: analogue LM35 temperature sensor module for Arduino. This Arduino temperature sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature. The LM35 chip offers a functional range between 0...

SEEED STUDIO

• BeagleBone® Black industrial based on Sitara AM3358 Processor • Sitara AM3358BZCZ100 1GHz, 2000 MIPS ARM Cortex-A8 32-Bit RISC microprocessor • Programmable real-time unit subsystem • 512MB DDR3L 800MHz SDRAM, 4GB eMMC memory • Operating temperature can...

KITRONIK

Get more entertainment from your :MOVE mini with the Bumper add-on. This will allow the mini to move balls and pucks, ideal for competing in games such as football and hockey. • Designed to fit both versions of the :MOVE mini • Perfectly matches the aesthe...

KITRONIK

A perfect introductory kit for juniors and beginners alike, the Discovery Kit contains five experiments to help you take your first steps with physical computing using a micro:bit (not included). The included tutorial book explains everything in depth, all...

4TRONIX

The Drive:Bit is a simple, pre-assembled robotics controller board designed for the micro:bit. Utilising the popular DRV8833 driver it is capable of driving two separate motors, perfect for building a cost effective robot. • Ideal for most small motors tha...

KITRONIK

Compact servo driver board solution designed for use with the micro:bit and is suitable for a wide range of robotics projects. Based on the PCA9685 driver IC the board is capable of driving up to 16 servos simultaneously and includes an integrated Edge Co...

4TRONIX

The XL is the bigger, better and much improved version of the popular Bit:Bot robot for the micro:bit. The Bit:Bot XL comes ready assembled and is fully compatible with the original Makecode extension, allowing you to take your fun to the next level! • 2 M...

KITRONIK

This audio cable is a simple solution for outputting sounds or music from the micro:bit directly to headphones or an amplified speaker. • Provides a 3.5mm TRS stereo socket • Crocodile clips for direct connection • 400mm Cable length

SEEED STUDIO

Grove system is a Grove Beginner Kit for Arduino - All-in-one Arduino compatible board with 10 sensors and 12 projects with Free Course. The Grove Beginner Kit for Arduino® is powered by one Arduino UNO compatible board (MicrochipATmega328p based Seeeduino...

KITRONIK

With the Tipper Truck add-on, your :MOVE mini can now carry and dump stuff! Designed to work with the :MOVE mini Mk2, but can also be fitted to the original model. • Designed to fit both versions of the :MOVE mini • Perfectly matches the aesthetic of the :...

KITRONIK

Klip motor driver for BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself) and there’s a ZIP LED output as well along with the battery voltage and another GND...

KITRONIK

ZIP Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1” footprint, it features a MEMS microphone for detection of sound and a piezo buzzer to play sound. If that...

UCREATE

Building on the success of the original model, the new micro:bit v2 brings a host of new features; sense & react to sound with the built-in microphone, play sound with the integrated speaker and make use of the new capacitive touch sensor. This starter kit...