Downlights

SYLVANIA

The Sylvania 80014 is a 4.8W LED recessed spotlight delivering 500 lumens at 3000K, ideal for damp areas with its IP65 rating. • Low profile 47mm recessed depth • Loop-in/loop-out terminals for fast wiring • Bezel diameter: 86mm • Cut-out: 68-74mm • Additi...

TIME LED

Designed to fit a range of domestic areas, the Fire Rated Downlight’s reliable fitting is the perfect modern, energy-efficient lighting upgrade. Meeting the BS requirements for 30, 60 and 90-minute fire ratings, the downlight comes complete with a terminal...

SYLVANIA

The Sylvania 5740 is a 4.5W LED recessed tilting downlight kit delivering 345 lumens at 3000K, ideal for damp areas with its IP20 rating. • Vertical tilt 25° • RefLED GU10 LED • Polycarbonate body • LED Driver constant current • Cut-out: 70-75mm • IP20 & I...

INTEGRAL LED

The downlight is supplied with configurable brackets and clips allowing for installation in a cut-out from 65-205mm as well as having a surface mount installation option. Visible flicker is eliminated with the integrated driver and a frosted diffuser provi...

PHILIPS LIGHTING

• Cable 0.25 m with push-in connector 3-pole • Beam angle: 60° • Connection unit 2-pole • Non-Dimmable • Dimensions (HxWxD) 82x170x170mm

PHILIPS LIGHTING

• Cable 0.25 m with push-in connector 3-pole • Beam angle: 60° • Connection unit 2-pole • Non-Dimmable • Dimensions (HxWxD) 100x225x225mm

SYLVANIA

The Sylvania 90022 is a pack of 3 4.8W LED recessed spotlight delivering 500 lumens at 3000K, ideal for damp areas with its IP65 rating. • Low profile 47mm recessed depth • Loop-in/loop-out terminals for fast wiring • Bezel diameter: 86mm • Cut-out: 68-74m...

V-TAC

• IP20 Downlights with ‘Twist & Lock’ design • Fire resistance of up to 90 minutes • White bezel • Quick connector included • Safe installation with spring clips • Easy maintenance • Cutout size: 75mm • Dimensions (WxH): 90x106mm

INTEGRAL LED

Ideal for tight spaces, 38.5mm super-low profile and replaceable lamp (Evolight). • Easy to install and remove, lightweight steel body • Ideal for indoor commercial or residential lighting • Dimmable • IP65 & IP20 Rated • Cut-out diameter: 70mm • Fire-rate...

INTEGRAL LED

Ideal for tight spaces, it's only 60mm high with a built-in insulation guard and replaceable lamp (Evolight). • Easy to install and remove, lightweight steel body • Ideal for indoor commercial or residential lighting • Dimmable • IP65 Rated • Cut-out diame...

RED ARROW

The recessed LED Circular Wallwasher Shoplight is ideal for applications such as shopping centres and reception areas. The 40° tilt angle and 45° beam angle make it perfect for feature lighting. • 2900 Lumens • 45° Beam angle • IP40 Rated • 40° Tilt angle ...

PHILIPS LIGHTING

• Compact design with built in driver • 68mm Fixation hole allows retrofitting • Beam angle: 36° • Dimmable • Dimensions (HxØ): 55x75mm

RED ARROW

Stylish IP65 rated Downlighter • Manufactured from diecast aluminium • Requires GU10 lamp (240V) • Dimensions (Ø x Cut-Out x H) 82 x 66 x 105mm

LEDVANCE

The LEDVANCE SPOT FP FIX 7W 3000K is a fire-resistant, recessed spotlight ideal for indoor and outdoor use. It delivers 530 lumens of warm white light (3000K) with a 38° beam angle, perfect for accent and general lighting. Designed for safety, it offers up...

UNBRANDED

• Suitable for installation on surfaces such as plasterboard or masonry • Requires a minimum ceiling depth of 140mm • Minimum distance required between each Downlight: 30cm • Downlight lead length: 1m • Non-Dimmable • Life span: 50,000 hours • Supplied i...

UNBRANDED

• Suitable for installation on surfaces such as plasterboard or masonry • Requires a minimum ceiling depth of 140mm • Minimum distance required between each Downlight: 30cm • Downlight lead length: 1m • Non-Dimmable • Life span: 50,000 hours • Supplied i...

UNBRANDED

• Suitable for installation on surfaces such as plasterboard or masonry • Requires a minimum ceiling depth of 140mm • Lead length from mains terminal block to LED driver: 40cm • Lead length from LED driver to last downlight connector: 1.8m • Overall lead ...

UNBRANDED

• Suitable for installation on surfaces such as plasterboard or masonry • Requires a minimum ceiling depth of 140mm • Lead length from mains terminal block to LED driver: 40cm • Lead length from LED driver to last downlight connector: 1.8m • Overall lead ...

ENLITE

• Perfect for a wide range of applications and installations • Utilises integrated intumescent material completely sealing the downlight and cut-out in the event of a fire • Complies with BS EN 1365-2:2014 (fire resistance) • Acoustic rated, providing sta...

V-TAC

LED Downlight fire-rated to resistance of 30, 60 and 90 minutes. Designed with long life Samsung LED chips and a 500 Lumen output. • Swift connection - quick connector included • High quality, durable steel body • Spring clips for safer installation and ea...

PHILIPS LIGHTING

• Compact design with built in driver • 25° Tilt • 68mm Fixation hole allows retrofitting • Beam angle: 36° • Dimmable • Dimensions (HxØ): 55x80mm

V-TAC

• Fire-rated to resistance of 90 minutes • Swift connection - loop-in, loop-out wiring • Effective acoustic installation and air leakage protection • High quality constructed durable steel body • Spring clips for safer installation and easy maintenance • ...

FORUM LIGHTING

• Suitable for 30, 60 and 90 minute fire resistant standard ceiling constructions • Protection against electric shocks: Class I (Earthed) • Material: Die cast steel • PTFE Cable • Lamp type: GU10 maximum 50W Halogen or LED equivalent (Not included) • Dime...

ENLITE

• Perfect for a wide range of applications and installations • Utilises integrated intumescent material completely sealing the downlight and cut-out in the event of a fire • Complies with BS EN 1365-2:2014 (fire resistance) • Acoustic rated, providing sta...

V-TAC

• Non-flickering • No UV radiation • Instant start, 0 - 100% in 0 seconds • Suitable for office and general lighting (conference room, showroom, lobby, cabin, kitchen etc.)