Add-on Boards / Modules

KITRONIK

Environmental control board for BBC micro:bit. It provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides the ability to control outputs for devices such as a water pump, fan, servo or heater pad. This makes i...

KITRONIK

Breadboard breakout for the BBC micro:bit allows the user to plug a BBC microbit into a standard 2.54mm pitch breadboard. Two 11 way pin headers are used to make connections into the breadboard. The micro:bit slots into the edge connector on the top side o...

KITRONIK

Purpose built and pre-assembled street light project for the micro:bit (suitable for V1 or V2), ideal for beginners and classroom coding projects. The LAMP:bit utilises a phototransistor to react to changes in ambient lighting levels, using this informatio...

WHADDA

Each joystick module provides X/Y axis control and push down switch, ideal for microcontroller based projects. • 3V to 5V DC Voltage • Contains 2x 10kΩ trimmers and switch • Dimensions (HxWxD): 25x32x47mm • Supplied as a pack of 2

KITRONIK

5698 is a Kitronik compact motor driver board for the BBC micro:bit. Add motor driving capability to the microbit with the Kitronik compact motor driver board for the BBC micro:bit. This motor driver board allows two motors to be driven simultaneously with...

ARDUINO

Arduino Sensor Kit is made for Makers who have just started using Arduino to explore the vast space of electronics and programming. This kit teaches how to connect and program basic Grove modules that includes both sensors and actuators. Grove is an open-s...

KITRONIK

Get more entertainment from your :MOVE mini with the Bumper add-on. This will allow the mini to move balls and pucks, ideal for competing in games such as football and hockey. • Designed to fit both versions of the :MOVE mini • Perfectly matches the aesthe...

WHADDA

Compact IR receiver module designed for infrared remote control and similar applications that require improved ambient light rejection. • Photo detector and preamplifier in one package • Internal filter for PCM frequency • Inner shield provides good anti-i...

WHADDA

The WPSE320 is an analogue temperature sensor module utilising a thermistor where the resistance is dependent on temperature. • NTC Type: NTC-MF52 3950 • Temperature range: -55°C to 125°C • Features a 10kΩ pull-up resistor • Connection: 3-pin male header •...

WHADDA

A Reed contact switch with a normally open contact which closes in the presence of a magnetic field. Supplied as a pack of 2 modules. • Each module contains a 10kΩ pull-up resistor • 3-pin Connection: +(middle pin), -(ground), S (Signal) • Voltage: 5V DC •...

WHADDA

Tactile switch module that contains a push button and a 10K pull-up resistor, ideal for integration into Arduino projects. • Connection: 3-pin male header • Pins: GND (Ground), + (middle pin) and DO (Data out) • Voltage: 5V DC • Features a 10kΩ pull-up res...

KITRONIK

Kitronik :VIEW Graphics128 OLED display 128x64 for BBC micro:bit. The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The on-board edge connector allows the micro:bit to slot into...

CYTRON

The Arduino Maker UNO Plus has been designed specifically to simplify Arduino for Education. Learn about and construct electronic circuits and explore physical computing. Traditional Arduino boards can make the task of troubleshooting circuits that don't w...

DFROBOT

SEN0252 is a Gravity: BMX160+BMP388 10 DOF sensor. The BMX160 9-axis absolute orientation sensor from Bosch Sensortec is an ideal solution for applications that face strict constraints of board space, power consumption and appearance, especially for wearab...

DFROBOT

SEN0156 is a Gravity: analogue rotary switch module V1. Rotary switch is often used when more than 2 positions are needed, such as multi-speed control. The rotary switch uses an analogue input to read the 12 state which saves IO resource for the Arduino. •...

SB COMPONENTS

Circular PCB board with 32 right angle WS2812B RGB LEDs that feature integrated drivers. The LEDs are fully compatible with the NeoPixel library and utilise a one-wire communication system, making them ideal for use with controllers that have limited outpu...

DFROBOT

DFR0699 is a Gravity: I2C voice recorder module EDU is DFRobot all-in-one voice interaction module, which integrates recording and playback functions into one. It can record with one button, and also supports Gravity: I2C interface for recording and playba...

WHADDA

The WPM402 module from Whadda is designed to easily convert a microcontroller's power supply into a higher, adjustable voltage. • Built around an LM2577 chip • Input voltage: 3.5V to 35V DC • Output voltage: 5V to 55V DC (adjustable) • Max. input current: ...

ARDUINO

ASX00039 is an Arduino® GIGA display shield. It is an easy way to add a touchscreen display with orientation detection to user Arduino GIGA R1 Wi-Fi (from now on referred to as GIGA R1 Wi-Fi) board. It has no microcontroller and cannot be programmed indepe...

DFROBOT

DRI0044 is a micro dual way DC motor driver with Gravity connector. It is design based on TB6612FNG motor driver chip. It inherits DFRobot L298N motor control logic, which only need four pins to drive 2 motors. The Gravity connector version expands four GP...

SB COMPONENTS

The USB TTL is a compact interface converters for Serial UART and USB interfaces. Designed to be completely plug & play, the TTL is equipped with a USB-A plug and USB-C and Micro USB ports. The onboard CH340 UART converter IC is capable of convertering USB...

DFROBOT

DFR0830 is a Gravity: digital 360° tilt sensor for Arduino. This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a sim...

SB COMPONENTS

The SquaryFi is a compact LCD board that combines an ESP-12E processor with a square 1.54" LCD display, making it a suitable solution for a range of development projects. The board features built-in wireless support and utilises an embedded ST7789 driver a...

SEEED STUDIO

Seeed Studio XIAO nRF52840 Sense featuring Nordic nRF52840 MCU supports Bluetooth 5.0 & NFC and is Arduino-compatible. As the advanced yet smaller version of the Seeed Studio XIAO nRF52840, it carries extra on-board 6-axis IMU and microphone sensors making...

DFROBOT

DFR0554 is a Gravity: I2C 16x2 Arduino LCD with RGB font display. DFRobot Gravity I2C 16x2 Arduino LCD with RGB font display use universal Gravity I2C interface, it means only two communication lines, you can realize communication and backlight control. Th...