Cable & Lead Testers

MERCURY

• Quickly test RJ45, RJ11, USB 2.0 cables & terminated BNC cables • Features LEDs for each conductor for individual continuity testing • Detachable remote tester • Low battery indicator • Includes case • Requires 1x PP3 (9V) battery (not included)

TEMPO

PA1574 tests the continuity of 8-way (RJ45) data and network and 6-way (RJ11) telephone patch cords and installed cable runs. It maps the cable, line by line and identifies good connections, opens, shorts and crosses. Includes patch cords, 9V battery and c...

TENMA

• DB9/RS232 simple link tester • Socket to socket connection • Small & compact design, easily fits in to pocket or tool box • Designed to be used in-line & require no power

EXTECH INSTRUMENTS

The CT20 is a Remote and Local Continuity Tester with one person operation for wire and cable testing. A bright flashing LED and loud pulsating beeper indicate local continuity. Remote continuity features the use of the remote probe, it does not tie-up two...

TEMPO

NETcat Pro2 digital VDV structured wiring troubleshooter with 128 x 128 dots LCD display. This is a digital tool for fast, accurate checking of cables, wiring and network service. It operated using a white LED back-lit touch screen display, the NETcat® Pro...

FLUKE

FLUKE T5-600 is a voltage, continuity and current tester. An ideal compact troubleshooting tool for up to 600 V environments, this tester is for use to check voltage, continuity, and current. Select volts, ohms, or current, and the tester will do the rest....

TENMA

Experience fast and efficient cable testing with our RJ-45 and RJ-11 Cable Tester. This indispensable tool is designed to provide quick and accurate testing for both RJ-45 and RJ-11 cables, ensuring that your network and telephone connections are always re...

UNBRANDED

The Connectix Tester is a quick, eay to use tool to verify connectivity. Its unique snap-together design makes it easy to take on-site. • Gives an instant indication of the connections present • Four bi-colour LEDs indicate the status of the pairs in the c...

PEAK

The Network Cable Analyser has just got smarter, much smarter. The has always been a fabulous tool for identifying and analysing RJ45 based network cables, sockets and patch panels. Now this instrument features new intelligent software that can identify ca...

KAUDEN

• Quickly and easily check RJ11/RJ45 network cables • Checks crossover/straight through wiring & open/short terminals • LED indicators for connections • Powered by 9V PP3 battery (not supplied) • Ideal for testing home made network cables • Both units cli...

FLUKE NETWORKS

MT-8200-60-KIT is an IntelliTone™ Pro 200 toner and probe kit. The first network cable toner and probe to offer digital and analogue signalling, all in one network toner and probe. Use digital mode to trace and locate data cabling safely and effectively on...

TEMPO

All models feature a powerful speaker for noisy environments, recessed on/off button control and high gain for accurate wire identification in congested cable bundles and equipment rooms. • Used in conjunction with any tone generator • Wire & cable identif...

TREND NETWORKS

A hand-held, battery-powered tool, the VFF projects a highly visible red light into a fibre optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. The VFF is equipped with a high-power, extra long-life, 650...

EXTECH INSTRUMENTS

A kit for tracing wires using a non-contact probe to audibly identify a selected wire or cable, enabling you to trace it from source to termination. This kit is ideal for identifying wire pairs, tracing telephone cables, checking continuity and testing tel...

TEMPO

The 180XL from Greenlee Communications is a visual fault locator kit. It is used to visually locate loss locations such as macrobends, bad connectors and other fibre discontinuities. Fibre continuity can also be visually confirmed. This visual locator also...

TEMPO

The PA70025 Network Tester Kit from DataShark® is a continuity tester for UTP and flat satin cables with RJ45 terminations. This tool tests both data and telephone connection schemes including patch cords and installed cables to identify good connections, ...

DURATOOL

• Tests cables with RJ11 or RJ45 connections • Ideal for use by installation and maintenance engineers • Suitable for telephone systems and computer networks • Tests twisted pair cables for short and open circuits and wrong connections • Allows testing of...

FLUKE NETWORKS

PRO3000F50-KIT is a tone generator and filtered probe. The Pro3000F filtered probe, 50Hz, “Stops the Buzz” by obstructing signal interference and unfiltered toner, for use on inactive networks, uses SmartTone™ technology, with five different tones to allow...

TEMPO

The NC-100 from Greenlee Communications is a NETcat® micro digital voice, data and video wiring tester for fast, accurate checking of VDV cables and in-wall wiring. This device verifies the integrity of both twisted (shielded, unshielded) pair and coaxial ...

SAC

A small and robust coax cable tester, with detachable tone detector, • Male F-type push-on fitting • Female F-plug attachment • Short circuit LED • Supplied with instructions and AAA battery

TEMPO

Quickly identifying faults accurately is essential for the busy cable technician: CableScout 90 offers a balanced mix of automation and manual testing that enables technicians to do their jobs right the first time. Delivers the latest TDR technology in a s...

DURATOOL

Cable length tester that measures and displays the distance to fault accurately using Time Domain Reflectometry (TDR) technology. • Supports Cat5e, Cat6, Cat6a, Cat7, power cable (4+2 LAN cable, 8+2 LAN cable), telephone cable, coaxial cable tracking and t...

FLUKE NETWORKS

26200900 is a Pro3000™ analogue tone generator. The Pro3000™ unfiltered toner, for use on inactive networks, uses SmartTone™ technology, with five different tones to allow the technician to easily identify individual pairs. Angled-bed-of-nails clips allow ...

DURATOOL

Multi-function cable tester which integrates multiple types of cable test and PoE. • Tests for open circuit, cross circuit, and connectors of RJ45, RJ11, and RJ12 are in working order • Can also be used to test whether the network cable is powered and has ...

IDEAL

The 62-160 PRO Tone Generator is used to send an analogue tone signal over copper cables to aid in identifying the location and identification of the cable. • Sends analogue tone signals on de-energised copper cables • Tone can be picked up by Ideal and ot...