Component Testing

PEAK

The Peak Atlas SCR100 is specifically designed for the rapid identification and analysis of a very wide range of thyristors and triacs. Just connect the test probes any way round and press test. The Atlas SCR100 will instantly identify the type of part, id...

PEAK

Intelligent and flexible semiconductor analyser. Supports transistors MOSFETs, JFETs (gate pin only can be identified), diodes, LEDs and lots more. Automatically identifies type of component, pinout and other important parameters. Features transistor leaka...

KEMO ELECTRONIC

Designed for testing wired LEDs in order to check function, brightness, colour and polarity. In order to facilitate selection of LEDs of equal brightness there are two test sockets with same currents (5mA/10mA) side by side. • Socket strip LED connection •...

PEAK

• Atlas ATPK2 dual DCA and LCR component analyser kit • Dual instrument pack for electronic hobbyists, technicians, bench engineers, manufacturing & QA • Comprising of the Peak Atlas DCA55 and LCR40 component analysers • Designed to enhance fault finding ...

TOA ELECTRONICS

The TOA ZM-104A impedance meter can measure the impedance of speaker lines easily in the same manner as a circuit tester measures resistance. It is equipped with a 3-step range selector which permits measuring of the impedance in the range of 5Ω to 100 kΩ....

TENMA

Compact meter is ideal for capacitor measurement in service and assembly applications. Quickly and accurately measure capacitance values up to 20mF (20,000μF), in nine ranges, and resistance to 2,000MΩ in nine ranges. • 3-1/2 digit 1999 count display • Tra...

PEAK

The LCR45 is a great enhancement of the popular LCR40. Bringing finer measurement resolution and advanced mathematical analysis to your workshop gear. • Fluid measurements with hold function • Automatic or manual component type • Automatic or manual test f...

IDEAL-TEK

Smart Tweezers™ is a handheld LCR meter for testing and identification of Surface Mount Devices (SMD) as well as trouble shooting of complex electronic systems. • Built-in high-precision LCR probe • Convenient one-hand operation • Ideal for Surface Mount D...

PEAK

The DCA75 Advanced semiconductor analyser combines ease-of-use with amazing features and can automatically identify a huge range of semiconductors, identify pinouts and measure detailed parameters • Features a graphics display, USB port, PC Software and an...

PEAK

• Atlas Pro pack contain LCR45 passive component impedance meter for advanced hobbyists, professionals • Contains DCA75 for component identification, pinout identification, characteristic measurement

PEAK

The Atlas ZEN has been designed to enable the testing of Zener and avalanche diodes, VDRs, TVSs, LED strings and more up to a voltage of 50V. • Measures breakdown voltage with 20mV resolution • Measures slope resistance up to 1kΩ @15mA • Test currents: 2mA...

PEAK

The Peak Atlas ESR Gold is an enhanced version of the previous Peak Atlas ESR Plus. It provides instant measurement of a capacitor's ESR and its capacitance value. Using the supplied gold-plated probes (removable), the Atlas ESR Gold can measure ESR down t...

MULTICOMP PRO

The 72-10465 from Tenma is a LCR meter in orange and grey colour. It features an easy to read dual LCD (40mm x 63mm) display measurement of 19999/1999 (main/auxiliary). It also has series and parallel measurement modes which can be used to select quality f...

MULTICOMP PRO

MP700434 is a handheld LCR meter, used to measure the parameters of a component such as inductance, capacitance and resistance. It features small in size, powered by a 5V lithium battery which can meet the requirements of desktop LCR meters and also be use...

MULTICOMP PRO

MP700433 is a handheld LCR meter, used to measure the parameters of a component such as inductance, capacitance and resistance. It features small in size, powered by a 5V lithium battery which can meet the requirements of desktop LCR meters and also be use...

IDEAL-TEK

The ST-LED from Ideal-Tek is a ST-LED smart tweezers LED tester. This is a specialized solution for testing and verification of SMD and through hole LEDs. The device design combines a pair of high quality gold plated tweezers and a digital adaptive LED tes...

IDEAL-TEK

The ST-5S-BT2 from Ideal-Tek is a Smart Tweezers™ with Bluetooth. It features a Bluetooth™ low energy link to mobile platforms. The link allows for visualization of measurements and measurement parameters, recording measurement sets, configuration of data ...

KEYSIGHT TECHNOLOGIES

U1701B is a handheld capacitance meter. This handheld capacitance meters expand Keysight’s portfolio of handheld tools into electronics assembly and passive components troubleshooting. • 4½-digit LCD with a maximum resolution of 11,000 counts and automatic...

MULTICOMP PRO

That resistance decade box is designed to meet the demands of diverse electrical applications. With a remarkable range spanning 7 decades, from 1Ω to over 11MΩ, and precise increments of 1Ω, this instrument offers unparalleled flexibility in resistance set...

PEAK

An innovative compact device for the automatic identification of most passive components (inductors, capacitors and resistors). Results are displayed on the clear green-mode LCD, showing the component type, measured value and test frequency. For inductors,...

KEYSIGHT TECHNOLOGIES

U1733C is a 100Hz/120Hz/1KHz/10KHz/100KHz handheld LCR meter. Now you can measure at frequencies as high as 100KHz, a capability that is typically found only in benchtop meters. Auto identification conveniently displays component type and detailed componen...

KEYSIGHT TECHNOLOGIES

U1731C is a 100Hz/120Hz/1KHz handheld LCR meter. With the U1731C, you can perform quick, basic LCR measurements at your convenience. Now you can measure at frequencies as high as 1KHz. With the one-touch automatic identification function button displays co...

UNBRANDED

A six decade resistance box that uses highly reliable rotary switches to provide an instant legible readout of the selected value. An additional resistor provides a very accurate potential divider. Ideal for laboratory, educational and industrial applicati...

KEYSIGHT TECHNOLOGIES

U1732C is a 100Hz/120Hz/1KHz/10KHz handheld LCR meter. Now you can measure at frequencies as high as 100KHz, a capability that is typically found only in benchtop meters. Auto identification conveniently displays component type and detailed component analy...

B&K PRECISION

The BK891 is a Bench LCR Meter capable of measuring inductors, capacitors and resistors at DC or from 20Hz to 300kHz. The instrument's compact 2U half-rack form factor is suitable for the bench or rack mount installation. A large 4.3-inch colour display wi...