Electrical Installation Testers

MULTICOMP PRO

The MP700006 Tone and Probe from Multicomp Pro provides a simple way to quickly trace and identify cables, wires and wire pairs. Connect the toner to the line, then trace the signal with the probe. The toner can also be used to test continuity and check ...

MULTICOMP PRO

The MP700110 from Multicomp Pro is an electronic digital earth resistance tester, which is a direct replacement for the conventional hand generator type tester. It is designed for the measurement of the resistance of earthing used in the electrical equipm...

EXTECH INSTRUMENTS

The 480400 from Extech Instruments is a phase sequence tester. It has a 40V to 600V rated range for testing phase orientation of 3-phase power sources over a 15Hz to 400Hz frequency range. Multiline graphical LCD indicates phase orientation (clockwise or c...

KEWTECH

The KEW3PH 3-Phase Adaptor for continuity, insulation and loop testing of 3-phase circuits. Just fit your own industrial plug. • For live and dead testing • Ensures fast and secure connections of 4mm test lead connectors • Colours referenced to old and new...

MARTINDALE ELECTRIC

The EZ165 not only detects fault conditions and check the mains voltage level, it also shows how safe the earth wiring is by carrying out a non-trip earth loop test and indicating its value in 6x discrete ranges from less than 1.7Ω to 500Ω. • Quick and eas...

KEWTECH

Kewtech single function testers provide a slick way to go 18th Edition testing. All compact, accurate, easy to use with a hands-free facility. • Tests type AC, ACS and A RCDs • 30mA autotest • Ramp test • AC Voltage VLN • Distribution board polarity test •...

KEWTECH

Test kit combining the KT66DL multifunction tester and KEWEVSE EV Test Adaptor. • KT66DL:- • Large colour dot matrix screen • Established easy to use interface with one rotary dial and four function keys • Two high current loop options: 25A 0.001 Ohm resol...

MARTINDALE ELECTRIC

The BZ701 not only detects 28 socket wiring fault conditions and checks the mains voltage level, it also safely detects Line-Neutral reversal (cross polarity) at the incoming supply. The polarity swap test detects a serious fault condition that cannot be i...

MULTICOMP PRO

MP760838 is a clamp earth ground resistance tester, used for testing grounding resistance. This device can quickly and safely measure the grounding system without disconnecting circuit ground lines or the needs of auxiliary electrodes. It can measure res...

FLUKE

FLK-FEV300/BASIC is a FEV300 electric vehicle charging station test adapter simulates the presence of an electrical vehicle, allowing the user to conduct safety and functionality tests in combination with appropriate test instruments such as an installatio...

FLUKE

ST240+/UK is a RCD socket tester with beeper checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Able to identify ...

SOCKET & SEE

The Socket & See SOK60/16HD 400V Industrial Socket Tester is a 4-pin tester protected by a hard wearing rubber case. Capable of providing instant phase sequence and clearly identifying phases as L1, L2, or L3. When used in conjunction with the ADP60 the in...

SOCKET & SEE

The Socket & See IRC PRO features 1kV testing, with up to 500 tests from a single set of 4x AA alkaline batteries. Expect even more tests when testing at 250V or 500V. Other useful features include a large back lit display and protective rubber over-mould,...

SOCKET & SEE

This kit provides a complete solution for testing 16A and 32A industrial sockets (230V, 3-pin). • Includes Socket & See SOK40 and ADP40 32A adaptor • Test both 16A and 32A industrial sockets • Suitable for testing 230V 16A and 32A 3-pin systems • Complete ...

SOCKET & SEE

This kit provides a complete solution for testing 16A and 32A industrial sockets (110V, 3-pin). • Includes Socket & See SOK50 and ADP50 32A adaptor • Test both 16A and 32A industrial sockets • Suitable for testing 110V 16A and 32A 3-pin systems • Complete ...

SOCKET & SEE

The Socket & See SOK50/16HD 110V Industrial Socket Tester is a sturdy, heavy duty tester specifically designed for UK 55-0-55V (110V) construction sites. It clearly indicates the position of L1, L2 and Centre Tap, plus when used with the Socket & See ADP50...

MULTICOMP PRO

MP780682 from Multicomp Pro is a UK socket tester, suitable for checking socket wiring errors and widely used within commercial and residential areas. • 230V operating voltage • <lt/>18mA operating current • 50Hz - 60Hz operating frequency • Indications: c...

DI-LOG

The DL9130EV Advanced EV MFT has been explicitly designed for engineers that offer EV installation as part of their testing portfolio. • 6mA pure DC test for RDC-DD verification and full Auto EV test sequence for verifies DC protection provided by the EV c...

DI-LOG

The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) states and Control Pilot (CP) states required to energise a free-standing or wall-mounted EV charge station. • Universal to all electrical multifunctional ...

SOCKET & SEE

The ISO KIT 215 is a comprehensive safe isolation kit that includes two essential tools for safe and efficient voltage testing. The Socket & See VIP150 Voltage Tester is a battery-free and compact voltage tester designed to measure AC and DC voltages in si...

SOCKET & SEE

The Socket & See LOCKKIT420 is designed with precision and safety in mind, catering to the rigorous demands of professional electricians and engineers. The kit is anchored by the VIP200 Voltage Tester, renowned for its compliance with the most stringent sa...

KEWTECH

Your essential 18th Edition accessory kit – all in one bag. This testing kit includes all those items that make your testing easier, safer, faster and more accurate. • TP4 pins - three test pins to allow for connection of a two-pole tester to testing adapt...

MEGGER

The MFT-X1 introduces our first generation of platform based, user upgradeable MFTs, to add to the existing Megger MFT1700 range of multifunction testers. With the MFT-X1, we now offer True Loop, our industry leading loop impedance test with patented Confi...

SOCKET & SEE

The Socket & See MFT5000 18th Edition Multifunction Tester, is an affordable and user-friendly tester that combines essential functions in one robust unit. With its colour-coded fascia and backlit screen, it is suitable for testing in diverse environments,...

SOCKET & SEE

The Socket & See LOCK KIT 215 is an indispensable all-in-one voltage testing and lockout/tagout kit designed for electricians, contractors, and maintenance teams working with electricity. This comprehensive kit ensures safe and efficient operations, includ...