Cable Continuity Testers

TEMPO

Quickly identifying faults accurately is essential for the busy cable technician: CableScout 90 offers a balanced mix of automation and manual testing that enables technicians to do their jobs right the first time. Delivers the latest TDR technology in a s...

IDEAL

The 62-164 PRO Amplifier Probe is used to audibly amplify analogue signals generated by standalone or built-in Ideal tone generators. Trace, locate, and identify wires. • Amplifies analogue tone signals from Ideal and other analogue tone generators • Compa...

IDEAL

All-in-one basic Voice-Data-Video wiremap tester to verify proper wiring and toning of low-voltage and data communications cables. • Voice/Data/Video LCD based wiremapper verifies cable continuity • Identifies errors by pin; shorts, opens, miswires, revers...

DURATOOL

Cable length tester that measures and displays the distance to fault accurately using Time Domain Reflectometry (TDR) technology. • Supports Cat5e, Cat6, Cat6a, Cat7, power cable (4+2 LAN cable, 8+2 LAN cable), telephone cable, coaxial cable tracking and t...

IDEAL

The 62-160 PRO Tone Generator is used to send an analogue tone signal over copper cables to aid in identifying the location and identification of the cable. • Sends analogue tone signals on de-energised copper cables • Tone can be picked up by Ideal and ot...

PROCEPTION

RJ45/RJ11 LAN tester used with Ethernet and telephone cable. • Tests wire continuity, short circuit and faulty connections • Remote unit allows testing of up to 300m by connecting to wall outlets or patch panels • The nine LEDs show you which wire is conne...

MULTICOMP PRO

MP001976 LAN cable tester is a versatile and reliable tool designed to test UTP, STP, and coaxial cables. This compact device quickly checks the integrity and connectivity of your network cables, ensuring that they are properly wired and functioning. It pr...

FLUKE NETWORKS

26200900 is a Pro3000™ analogue tone generator. The Pro3000™ unfiltered toner, for use on inactive networks, uses SmartTone™ technology, with five different tones to allow the technician to easily identify individual pairs. Angled-bed-of-nails clips allow ...

DURATOOL

Multi-function cable tester which integrates multiple types of cable test and PoE. • Tests for open circuit, cross circuit, and connectors of RJ45, RJ11, and RJ12 are in working order • Can also be used to test whether the network cable is powered and has ...

FLUKE NETWORKS

26100900 is a Pro3000™ unfiltered analogue probe for use on inactive networks, features a loudspeaker to hear tone clearly through walls, enclosures and in loud environments. The recessed on/off button helps prevent the probe from accidently being turned o...

DURATOOL

Network cable tracker that offers digital and analogue signaling in one network toner and probe. • Three cable tracing modes - digital, analogue, and PoE • Tone generator sends strong, clear toning to locate cables more quickly • PoE scan mode will makes c...

TREND NETWORKS

R180001 is an amplifier probe compatible with LanTEK IV, III & II, LanXPLORER Pro, SignalTEK, NaviTEK, PoE PRO & VDV II network testers. The Amplifier Probe for Data Cable Tracing is designed to identify and trace wires or cables within a group without dam...

TREND NETWORKS

R180002 is a tone generator compatible with LanTEK IV, III & II, LanXPLORER Pro, SignalTEK, NaviTEK, PoE PRO & VDV II network testers. Tone Generator for Data Cable Tracing is equipped with comprehensive line testing features for troubleshooting and servic...

MOLEX

• Innovative 3-in-1 design features modular jacks for USOC, 568A/B unshielded/shielded cabling systems • Accurately verifies the continuity and sequence of 1, 2, 3 and 4 pair channels • Ergonomically designed, lightweight and rugged • Features master and ...

FLUKE NETWORKS

PRO3000F50 is a filtered probe. The Pro3000F filtered probe, 50Hz, “Stops the Buzz” by obstructing signal interference (caused by power cables and lightning) present in the environment when listening for tone. The probe's powerful speaker makes tracing cab...

TEMPO

500m launch cable SC UPC singlemode. Typically the technician will use a launch cable on the input and output connectors of the fibre under test. This allows the technician to characterize the insertion and return loss of the input and output connectors of...

TEMPO

Quickly identifying faults accurately is essential for the busy cable technician: CableScout 90B offers a balanced mix of automation and manual testing that enables technicians to do their jobs right the first time. Delivers the latest TDR technology in a ...

FLUKE NETWORKS

IntelliTone Pro 200 Probe for use with the IntelliTone™ Pro 200 LAN Toner. IntelliTone Pro is the first toner and probe to offer digital and analogue toning all in one tool. That means it’s equipped with the most powerful cable location and verification te...

TREND NETWORKS

R163-VIP is a USB fibre optic video inspection probe designed for use with the LanTEK IV, provides precise fibre optic connector inspections. It includes 2.5mm and 1.25mm tips for inspecting connectors outside of panels, couplers, or bulkheads. • Fiber opt...

MEGGER

The TDR2050 is a tough, two-channel cable fault locator for power applications. Designed for the location of faults in electrical power supply cables, the TDR2050 is supplied with fused test leads that are rated to CAT IV 600V and are dust and weatherproof...

TEMPO

Removable remote jack unit, for use with the Tempo NC-500 NETcat Pro 2 Structured Wiring Troubleshooter.

TREND NETWORKS

R163030 is a LANTEK IV-L cable certifier. LanTEK IV-L certifies cabling to Cat 6A/Class EA in 10 seconds, including DCRU/PoE compliance, TCL noise immunity and distance to NEXT fault measurements. VisiLINQ™ permanent link adapters present a new and unique ...