Testers, Detectors & Calibration

KAUDEN

• LAN tester with remote, PoE checker and test lead • Test pin out status on structured wiring systems • Determines presence of live Ethernet cabling • LAN Tester • Locates short circuit, open circuit and wrong connection using attached remote • Confirms ...

DURATOOL

• Visual and audible indication of voltage • LED light function • CAT III 1000V rated • Battery life of 6 hours (with continuous use) • Requires 2x AAA batteries (not included) • Dimensions: 147x17x25mm • Weight:22g

MARTINDALE ELECTRIC

The VI13800 is a safety voltage indicator which contains a high wattage resistor in the probe which limits the current in the event of damage to the cable, ensuring better protection than with a fuse. • Two pole voltage indicator • Bright LEDs for clear in...

FLUKE NETWORKS

MT-8200-60-KIT is an IntelliTone™ Pro 200 toner and probe kit. The first network cable toner and probe to offer digital and analogue signalling, all in one network toner and probe. Use digital mode to trace and locate data cabling safely and effectively on...

TEMPO

All models feature a powerful speaker for noisy environments, recessed on/off button control and high gain for accurate wire identification in congested cable bundles and equipment rooms. • Used in conjunction with any tone generator • Wire & cable identif...

TESTO

• Allows fast initial checking of any suspected fault sources • Red LED indication and audible warning on voltage detection • Flashlight in the tip for illuminating testing area • Filter for high frequency interference to improve reliability • Waterproof ...

SOCKET & SEE

The SP400 proving unit provides a safe and reliable means of checking the correct functioning of multimeters and two-pole voltage indicators before and after use as well as the capability to check the operation of non-contract voltage detectors. • Intellig...

FLUKE

Fluke's two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere. • CAT IV 600 V, Cat III 690 V safety rating • 4 ways to detect ac/dc voltage ...

EXTECH INSTRUMENTS

A kit for tracing wires using a non-contact probe to audibly identify a selected wire or cable, enabling you to trace it from source to termination. This kit is ideal for identifying wire pairs, tracing telephone cables, checking continuity and testing tel...

TREND NETWORKS

A hand-held, battery-powered tool, the VFF projects a highly visible red light into a fibre optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. The VFF is equipped with a high-power, extra long-life, 650...

KAUDEN

• Quickly and easily check RJ11/RJ45 network cables • Checks crossover/straight through wiring & open/short terminals • LED indicators for connections • Powered by 9V PP3 battery (not supplied) • Ideal for testing home made network cables • Both units cli...

MARTINDALE ELECTRIC

The VT25 is a compact voltage tester that measures continuity, phase rotation and voltages between 12V and 690V. Meeting the latest standards, these are suitable for industrial and domestic applications. • Automatic AC/DC detection • Optical and acoustic c...

FLUKE

FLUKE BT510 is a Fluke 500 series battery analyser that is an ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications. The intuitive user in...

MEGGER

The Megger MPU690 proving unit provides a portable battery operated voltage source that can verify the correct functioning of a two pole voltage detectors. • 5 stepped nominal output voltages (50, 100, 230, 400, 690V) • Automatic power on when probes inser...

TEMPO

The 180XL from Greenlee Communications is a visual fault locator kit. It is used to visually locate loss locations such as macrobends, bad connectors and other fibre discontinuities. Fibre continuity can also be visually confirmed. This visual locator also...

MULTICOMP PRO

Easy to use, non-contact AC Voltage tester. Just touch the tip against a terminal strip, outlet or supply cord and the tester will beep and the tip glows red to indicate Voltage. • Thin probe tip for working with wall outlets • LED light function on the re...

NWS

• Contactless voltage tester with torch • For AC • Integrated torch for illuminating measuring points • Pushbutton for switching on and off, with self-test and visual readiness indicator (white LED) • Device complies with standard EN 61010-1 • Measurement...

TENMA

• Enables quick convenient continuity cable testing for all types of cables • LEDs confirm each conductor continuity and connection • 9-way switch for selecting connections to be tested • Internal battery and ground connection status checks • Tests the fo...

TEMPO

The PA70025 Network Tester Kit from DataShark® is a continuity tester for UTP and flat satin cables with RJ45 terminations. This tool tests both data and telephone connection schemes including patch cords and installed cables to identify good connections, ...

MARTINDALE ELECTRIC

Voltage indicator has a 1000V CATIV safety rating and LED indication for AC/DC voltages from 50V to 690V and above, ensuring compliance with health and safety recommendations for safe working in all BS EN61010 installation categories. It’s the simplest and...

DBX

• Advanced cable testing unit • Tests up to 8-pin cables • 2 piece chassis for testing installed cables • Test tone generator • Allows connection between different format connectors with ease • Banana connector continuity tester with beeper and LED indica...

MARTINDALE ELECTRIC

The VIPDLOK150 Lock Out Kit contains the VI-15000 Voltage indicator, matching PD690 proving device, along with a complete lock out kit, supplied in soft carry cases. The kit makes it easy to comply with Health & Safety recommendations for safe working prac...

EXTECH INSTRUMENTS

The MF100 measures both AC and DC magnetic fields with a uniaxial Hall effect sensor and built-in automatic temperature compensation. • North and south pole indicator • Zero button for DC measurement • Data hold and max/ min functions • Auto power-off with...

DBX

CT2 cable testing unit can be used evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connector...

DURATOOL

• Tests cables with RJ11 or RJ45 connections • Ideal for use by installation and maintenance engineers • Suitable for telephone systems and computer networks • Tests twisted pair cables for short and open circuits and wrong connections • Allows testing of...